Rocket Ship for Bonne Maman Jars!

Does anyone else consume and collect Bonne Maman jams jars like we do? Why not give them a Rocket Ship to travel in?

Upcycle your jars and reach for the stars with a simple storage solution that is food-safe and fun for the kids. The glass jar simply slides into the rocket ship sleeve, and is perfect for storing snacks, paper clips, or practically anything else. Easy to remove and clean, so your rocket stays pristine.

Fun to play with (maybe better without the glass jar!), display as a desk accessory, or let your imagination guide you!

Check out our video on YT:
https://www.youtube.com/watch?v=yBSIvadq_VA

6 PART print, with details as follows –

1. Rocket Ship Body (91mm x 96mm)

   • printed PETG
   • .20 Quality print setting
   • No Supports
   • 15% Infill for a 10 hr print time, or
   • 0% Infill for a 6 hr print time (please note, we have not tried this setting and cannot guarantee it will work with no infill)

2. Nose Cone (70mm x 95.5mm)

   • printed TPU
   • .20 Quality print setting
   • No Supports
   • 15% Infill for a 5:30 hr print time

3. Rocket Ship Stand/Exhaust Trail (17mm x 100mm)

   • printed TPU
   • .20 Quality print setting
   • No Supports
   • 15% Infill for a 3 hr print time

4. Fins (4mm x 65mm) – Need 4X

   • printed PETG
   • .20 Quality print setting
   • Supports on Build Plate only
   • 15% Infill for a 1:15 hr print time for all 4 gang printed

5. Rocket Ship Torus Deco (95mm diameter) – Need 2X

   • printed TPU
   • .10 Detail print setting
   • No Supports
   • 15% Infill for a 1 hr print time

6. Porthole (16mm x 28mm) – Need 4X

   (This is a MULTI-PART print [3 parts to be printed as 1], but an
   MMU-compatible printer is not necessary, with a slight
   modification. The 3 STL files, Porthole, Rivets, & Window can
   be printed as one unit with two manual color changes, and it
   will still look pretty decent. But, it is simpler if you have an
   MMU!

   • printed PETG
   • .10 Detail print setting
   • Supports on Build Plate Only
   • Turn Ironing On for a smoother dome
   • 15% Infill for a • 3:15 hr print time for all 4 gang printed (manual color change) • 4:30 hr print time for 4 gang printed with MMU

You will also need super glue for the assembly. We recommend you glue the fins, portholes, torus decos, and base, but leave the jar lid unglued to the nose cone for easier cleaning.

Total Print time - approximately 21.5 - 25.5 hours

Printed on a Prusa i3MK3s+ with MMU2S