Project Box for Variable Speed DC Fan Control
This object has been checked for printability, but did not pass the test and was deemed not printable. This object is still shareable and people with this link will be able to see and download the object, so please make sure you watch out and progress with care!
×Project Box for Variable Speed DC Fan Control
Project Box.
For Variable Speed DC Fan Control Unit.
----------------------------------------
Bobblejot Website
Bobblejot GitHub
Bobblejot Twitter
Bobblejot Patreon
----------------------------------------
Details:
I needed a small box for an installation on site for a basic DC clutch control for a Clarke clutch.
The unit was only 12vdc and 0.9A and they just needed a basic tension adjust, the original Power supply and Tension Unit would have cost in excess of £500.
£10 dc supply and £10 PWM Fan controller and £6 Display and all is well in the world again :-)
----------------------------------------
Materials:
The Items i purchased from Amazon.
Printed using Real Filament PETG in Black from amazon.
Nozzle : 0.4
Layers : 0.2
Print Temp : 240°C
Bed Temp : 80°C
Print Speed : 70mm/s
Top Layers : 5
Bottom Layers : 4
Perimeters : 3
Infill : 30%
Printed on PEI.
Status | Rejected |