AENATT02 - Natural Bridges
$10.00 AENATT02 - Natural Bridges
3D
Published 2022-05-18T11:23:48+00:00
This set of 3D-printable STL models includes multiple bridges to populate your maps. There are tree trunks to lay down as bridges, rock bridges (with base on either end), wood plank bridges, an ice bridge, and a spectacular vine-covered bridge between two hollowed-out trees. The wood and vine bridges each clip together to span still larger chasms!
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 18/05/2022 |
| Price | $10.00 |
| Support Free | YES |