Freezable Can Cooler
Freezable Can Cooler
3D
Published 2021-06-10T09:29:35+00:00
Summer is here and now you can have the best can cooler!
It was designed for cans, but it fits 12oz glass bottles as well, but it's a loose fit.
The cooler has 2 openings at the top, one was made to pour water between the inner and outer wall, the other one is to allow the air to escape as you fill it out.
Don't fill it to the top, because the water expands when it freezes. AFTER it's frozen, close the 2 openings with the lid, to avoid spill when the ice starts to melt.
You need a 3x1 o-ring on each lid to guarantee it will seal the opening properly.
You can print a funnel to help you to fill it out if you want.
Have fun and enjoy a cold beverage this summer!
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
| Date published | 10/06/2021 |
| Support Free | YES |