Leaf Mousepad
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Leaf Mousepad
Yes - this is a VERY niche product.
This is a mousepad that fits over the "gear stick" of a Gen 1 Nissan Leaf.
This will be of interest to Nissan Leaf hackers who spend a lot of time with their laptop sitting in the drivers seat fiddling with code and uploading endlessly.
Note: it's only useful to righthand people sitting in left-hand-drive cars, or left hand people sitting in right-hand-cars.
It fits the first generation Leafs with electronic brake. I haven't tried it on any other model/variant.
I added a felt covering on the top with double sided tape. This provides a quieter mousing experience. Without the felt this mousepad acts as a sounding board for your mouse and is surprisingly loud.
I printed it on a Creality CR10-Mini using PLA. It took about 15 hours with a 0.4mm nozzle.
No supports needed.
Status | Under Review |
Dimensions | 260 x 165 x 65 mm |
Support Free | YES |