[RC Tank] Bantam Willys trailer for JEEP 1/16, 1/35 and 1/43

The 1/4 ton trailer is the jeep's essential companion. Created in 1942, more than 150 000 were built by Bantam and then by Willys. Being a Willys Jeep owner, I created this model from a real trailer.

4 possibilities:

• Trailer willys 1/16 complete (trailer-1.16.Bp): options without

or with 2 ball bearings 10*6*3 for each wheel (beering 10*6*3) or included the disc kit. (you can replace the wheel axle with a 76mm*3mm brass Rod or cut from a wire hanger)

• Trailer willys 1/16 for small printer (trailer-1.16.Sp).

The front and rear walls are to be printed separately to be printed with a small printer type Elegoo Mars or Longer Orange. Possibility to put 2 ball bearings 10*6*3 for each wheel (beering 10*6*3) or included the disc kit. Same for the wheel axle.

• Trailer scale 1:35 complete with detail (trailer-1.35)

• Trailer simplified scale 1:43 (trailer-1.43) ideal with Jeep Solido

Optimized design to print with all SLA printers on the market. For the smaller ones, put the box vertically with an 80° angle to print it in one go. SLA recommended to get the best details but FDM possible of course.

Print the sheet in fdm to obtain the texture fabrics (16 or 20 micro approximately) and 10 hooks (4 by large sides + 1 front/rear sides)