Rommel's Rod enhanced track kit

Contains enhanced tracks, drive wheel, road wheels, idle wheel for the monogram midel kit. the track needs improvment,.

to ensamble you will need:
-super glue
-sand paper
-twizzers
-hobby knife

​the order to ensamble :

1.- sand all the plane surfaces of each part
2.- Glue rommel rod A with rueda rod rommel B, then with C, then with D. Align the parts to be sure you can seethru the wheel patern.
3.- Repeat the process with rueda rommel rod int A anb B.
4.- Repeat the process with Rueda esclava p1 and p2.
5.- Repeat the process with Rueda Sproket p1 and p2.
6.- Paint all the ensambled parts at this moment, that's becasue the next step doesn't allows you to paint in detail all the wheels.
7.- Using the ejes part as main chasis you need to ensable in this order to make sure the kit fots well:
for the RIGHT side track:
Rueda Sproket, rueda rommel rod, rueda rommel rod int, rueda rommel rod, rueda rommel rod int, rueda rommel rod and finally Rueda esclava
for the LEFT side Track:
exact same order in reverse.
8.- glue all the track links using a wood pick being careful to not use exess of glue. using an elastic glue f.e. loctite flexible adhesive. helps a lot.
9.- paint the tracks
10. glue the traks to close the loop fitting in place making sure to see the correct way of the track
11.- using the hobby knife cut the original plastic axis of the model.
12.- flat the surface whith sand paper.
13.- glue the ensamble tracks to the model.
14.- clean and enjoy.

to print in resin using the flat face of each part