Skip to content

AT-06 airsoft 40mm drum six-shoot grenade launcher

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.1/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 18k views
  • 85 likes
  • 70 downloads
  • 1 collection
  • 5 comments
License
3D design format
PDF and STL Folder details Close
  • AT-06 Instruction.pdf
  • back plate latch arm.stl
  • back plate latch.stl
  • back plate release.stl
  • back plate.stl
  • barrel bed.stl
  • barrel.stl
  • drum plate.stl
  • drum release rod.stl
  • drum's lock release.stl
  • drum's locking pin.stl
  • drum's pin nut.stl
  • drum's pin plate.stl
  • drum.stl
  • drums' axis pin.stl
  • firing pin.stl
  • front plate latch.stl
  • front plate.stl
  • inner body pin.stl
  • inner body.stl
  • latch pin.stl
  • lower locking pin guiding.stl
  • pin's rod.stl
  • plate connector.stl
  • release pin pad.stl
  • safety button 1.stl
  • safety button 2.stl
  • safety lock.stl
  • safety.stl
  • screw pad.stl
  • spring lock.stl
  • stock tube.stl
  • trigger.stl
  • tube connector pad.stl
  • tube connector.stl
  • tube screw pad.stl
  • upper locking pin guiding.stl

Learn more about the formats
Last update 2023-05-08 at 11:09
Publication date 2021-07-05 at 15:18
Design number 465852
NothingAtAllForNow

NothingAtAllForNow

3D printer file info

3D model description

Hi! Here is my other project. This time it's AT-06! Its six-shoot drum grenade launcher with self rotating drum. The launcher shoots and rotates the drum by pulling the trigger. It's compatible with any 40mm airsoft grenades or taginn shells.

Parts you need:

Metal parts for assembly:

Screws:
- 8x M6 x 20mm with nuts
- 2x M6 x 10mm with nuts
- 1x M6 x 70m with nut
- 10x M4 x 20mm with one nut (nut goes to handgrip)
- 4x M5 x 10mm with nuts
- M8 x 200mm threaded rod with two nuts
- M3 x 31mm and M3 x 12mm -for safety buttons and locking pin
- M3 x 15mm for locking pin guiding
- 3x M3 headless min. 8mm or longer
- 6x woodscrew which is nt longer than 20mm and will fit into 3mm hole and it must have flat drafted head

Springs: (number of springs x ID;OD;L):
- piece of 1mm metal wire to make a rotary spring for drum’s lock guiding
- 6 x 7,4 x 7mm for safety lock
- 6 x 7,4 x 12mm for drum’s locking pin
- 6x 6 x 7,4 x 16mm for locking rods
- 6 x 7,4 x 18mm for firing pin
- 7,6 x 9,2 x 10mm for drum’s lock release

- M90 spring x 16 (or something similar) for back plate release
- 20 x 23 x 45mm stretch spring (length is given without latch/locking arms) it is shown on last photo, make sure you can get it - for drum rotation

Other:
- 3 x 20mm rod for trigger

Tools:
- Standard handtools
- 6mm and 3mm drill or reamer for holes
- Very long allen key for M6 screw inside stock tube (should be about 200mm long)

You get all STL files and PDF instruction for assembly.

To print it your printer bed should be 200x200x200mm

Drum tube inner diameter is 41.2mm, Launcher should be used only with Greengas shells

Thank you and hope you like it!

3D printing settings

Print with settings suitable for you ;) All parts should fit but it depends on your printer settings.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.