FULLY 3D PRINTED RC CAR

ENGLISH

Remote control car fully 3D printed!

A full instruction manual is provided with purchase.

The printout consists of 8 parts to be printed separately and assembled :

• The body (which fits on the chassis very easily)

• The rear chassis

• The rear wheel axle

• The two rear brackets to lock the rear wheel axle

• The front part of the vehicle

• The engine block

• The pinion to be fixed on the output shaft of the engine

The two parts of the vehicle frame fit together and lock with a paper clip and glue.

Components used:

• An SG90 9g servo motor:

https://www.amazon.fr/AZDelivery-Digitales-Micro-Servo-Parent/dp/B081Z5V3M2

https://boutique.semageek.com/fr/104-micro-servo-tower-pro-sg90.html?search_query=sg90&results=1

• a paper clip

• glue to assemble the pieces

• A radio transmitter/receiver of your choice, for my part I use a model radio control with a standard receiver in 2.4GHz :

https://hobbyking.com/fr_fr/hobby-king-2-4ghz-6ch-tx-rx-v2-mode-2.html

https://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Radion-Transmitter-With-FS-iA6B-Receiver-for-RC-FPV-Drone-p-983537.html?p=VP240122576862201806&custlinkid=570770&ID=42482&cur_warehouse=CN

https://www.amazon.fr/GoolRC-Num%C3%A9rique-T%C3%A9l%C3%A9commande-Emetteur-R%C3%A9cepteur/dp/B01IN61HNQ/ref=sr_1_1_sspa?dchild=1&keywords=futaba+radiocommande&qid=1595760772&sr=8-1-spons&psc=1&smid=APOT02D1WPO96&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQjQ3NlIzMFNHUlZaJmVuY3J5cHRlZElkPUEwMzU5ODIxRDdXQllGRkdMODBVJmVuY3J5cHRlZEFkSWQ9QTEwMTY5MzMyQ1ZSRDJINEw0MTdWJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

• Any standard LIPO battery 2S 500 mAh 7.4V (with correct connector output) :

https://www.conrad.fr/p/pack-de-batterie-lipo-74-v-500-mah-conrad-energy-1344145-25-c-softcase-fiche-bec-femelle-1344145?utm_campaign=shopping-feed&utm_content=free-google-shopping-clicks&utm_medium=surfaces&utm_source=google&utm_term=1344145&vat=true

• Li-Po battery charger for 2S :

https://www.amazon.fr/FCONEGY-Chargeur-7-4-11-1V-Chargeurs-Batteries/dp/B07SCHPWD5/ref=sr_1_2_sspa?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=lipo+charger+2S&qid=1625588781&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyV0tQUEMzWUs0NUtHJmVuY3J5cHRlZElkPUEwMzc1MzMzOVVUTDgzVDNKMTY2JmVuY3J5cHRlZEFkSWQ9QTAzMjE1NzkxVExVR1NYUzk0Wkk1JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

• Connector for the motor (optional) :

https://www.amazon.fr/Haobase-10Paire-Connecteur-Femelle-Helicoptere/dp/B01FLG3VNA/ref=pd_vtp_147_4/257-9197973-2189454?_encoding=UTF8&pd_rd_i=B01FLG3VNA&pd_rd_r=ea096a5e-44c3-43f2-af06-9f178cbbf47f&pd_rd_w=jlWTc&pd_rd_wg=Hd3j3&pf_rd_p=590f8b81-2432-4801-9052-d84f90f93b85&pf_rd_r=9RNRGJ03FDSKG68QPBH3&psc=1&refRID=9RNRGJ03FDSKG68QPBH3

• ESC for RC car :

https://www.amazon.fr/Dilwe-contr%C3%B4leur-Vitesse-%C3%A9lectrique-Voiture/dp/B07N75NT5C/ref=pd_rhf_dp_s_ci_mcx_mr_hp_d_2/258-7050170-7388731?pd_rd_w=v1fy1&pf_rd_p=488baae5-da01-4c39-9634-2e6bef5d3349&pf_rd_r=XWSM14V11NX2QBRWPJ0W&pd_rd_r=c85c1e62-af2a-4032-a4c2-0c720ca68e42&pd_rd_wg=HwRNn&pd_rd_i=B07N75NT5C&psc=1

• Small N20 DC motor with gears 6-12V 300rpm at 6V :

https://www.amazon.fr/dp/B01BBSXDJ4/ref=sspa_dk_detail_3?pd_rd_i=B01BBSXDGW&pd_rd_w=15uKy&pf_rd_p=3afb8a41-31cf-4c83-9652-e8a14b7fc80c&pd_rd_wg=A5OJb&pf_rd_r=TAS5W7DNH8ZAY92WJEDB&pd_rd_r=b7a04beb-8ef8-4d13-bf6a-682466dc9a6a&smid=AB4PHP13UVZQB&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFDSkVCWVNaUjNZQ1kmZW5jcnlwdGVkSWQ9QTA3OTYyODgzMVdZQ0ZPVE5BUUZZJmVuY3J5cHRlZEFkSWQ9QTAzODgyMTNMU0FGNzdFM0xSWFAmd2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWMmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl&th=1

The suppliers given here are only examples, many compatible products are available on the internet.

Make sure your printer is properly calibrated before printing the parts.

ENGLISH

Fully 3D printed radio controlled car !

A complete instruction guide is provided upon purchase.

The print is made up of 8 parts to print and assemble :

• The car body (which fits easily onto the frame)

• The rear frame

• The rear axle

• The two rear supports to lock the rear wheel axle

• The front frame

• The engine block

• The drive gear which is fixed to the motor

The two parts of the vehicle frame fit together and lock with a paper clip and glue.

Components used :

• An SG90 9g servomotor :

https://www.amazon.fr/AZDelivery-Digitales-Micro-Servo-Parent/dp/B081Z5V3M2

https://boutique.semageek.com/fr/104-micro-servo-tower-pro-sg90.html?search_query=sg90&results=1

• A paperclip

• Glue to assemble the parts

• A radio transmitter / receiver of your choice, I used a standard 2.4 GHz one radio control :

https://hobbyking.com/fr_fr/hobby-king-2-4ghz-6ch-tx-rx-v2-mode-2.html

https://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Radion-Transmitter-With-FS-iA6B-Receiver-for-RC-FPV-Drone-p-983537.html?p=VP240122576862201806&custlinkid=570770&ID=42482&cur_warehouse=CN

https://www.amazon.fr/GoolRC-Num%C3%A9rique-T%C3%A9l%C3%A9commande-Emetteur-R%C3%A9cepteur/dp/B01IN61HNQ/ref=sr_1_1_sspa?dchild=1&keywords=futaba+radiocommande&qid=1595760772&sr=8-1-spons&psc=1&smid=APOT02D1WPO96&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQjQ3NlIzMFNHUlZaJmVuY3J5cHRlZElkPUEwMzU5ODIxRDdXQllGRkdMODBVJmVuY3J5cHRlZEFkSWQ9QTEwMTY5MzMyQ1ZSRDJINEw0MTdWJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

• Any standard LIPO battery 2S 500 mAh 7.4V (with correct connector output) :

https://www.conrad.fr/p/pack-de-batterie-lipo-74-v-500-mah-conrad-energy-1344145-25-c-softcase-fiche-bec-femelle-1344145?utm_campaign=shopping-feed&utm_content=free-google-shopping-clicks&utm_medium=surfaces&utm_source=google&utm_term=1344145&vat=true

• Li-Po battery charger for 2S :

https://www.amazon.fr/FCONEGY-Chargeur-7-4-11-1V-Chargeurs-Batteries/dp/B07SCHPWD5/ref=sr_1_2_sspa?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=lipo+charger+2S&qid=1625588781&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyV0tQUEMzWUs0NUtHJmVuY3J5cHRlZElkPUEwMzc1MzMzOVVUTDgzVDNKMTY2JmVuY3J5cHRlZEFkSWQ9QTAzMjE1NzkxVExVR1NYUzk0Wkk1JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

• Connector for the motor (optional) :

https://www.amazon.fr/Haobase-10Paire-Connecteur-Femelle-Helicoptere/dp/B01FLG3VNA/ref=pd_vtp_147_4/257-9197973-2189454?_encoding=UTF8&pd_rd_i=B01FLG3VNA&pd_rd_r=ea096a5e-44c3-43f2-af06-9f178cbbf47f&pd_rd_w=jlWTc&pd_rd_wg=Hd3j3&pf_rd_p=590f8b81-2432-4801-9052-d84f90f93b85&pf_rd_r=9RNRGJ03FDSKG68QPBH3&psc=1&refRID=9RNRGJ03FDSKG68QPBH3

• ESC for RC car :

https://www.amazon.fr/Dilwe-contr%C3%B4leur-Vitesse-%C3%A9lectrique-Voiture/dp/B07N75NT5C/ref=pd_rhf_dp_s_ci_mcx_mr_hp_d_2/258-7050170-7388731?pd_rd_w=v1fy1&pf_rd_p=488baae5-da01-4c39-9634-2e6bef5d3349&pf_rd_r=XWSM14V11NX2QBRWPJ0W&pd_rd_r=c85c1e62-af2a-4032-a4c2-0c720ca68e42&pd_rd_wg=HwRNn&pd_rd_i=B07N75NT5C&psc=1

• Small N20 DC motor with gears 6-12V 300rpm at 6V :

https://www.amazon.fr/dp/B01BBSXDJ4/ref=sspa_dk_detail_3?pd_rd_i=B01BBSXDGW&pd_rd_w=15uKy&pf_rd_p=3afb8a41-31cf-4c83-9652-e8a14b7fc80c&pd_rd_wg=A5OJb&pf_rd_r=TAS5W7DNH8ZAY92WJEDB&pd_rd_r=b7a04beb-8ef8-4d13-bf6a-682466dc9a6a&smid=AB4PHP13UVZQB&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFDSkVCWVNaUjNZQ1kmZW5jcnlwdGVkSWQ9QTA3OTYyODgzMVdZQ0ZPVE5BUUZZJmVuY3J5cHRlZEFkSWQ9QTAzODgyMTNMU0FGNzdFM0xSWFAmd2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWMmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl&th=1

The given suppliers here are only examples, many compatible products are avaiblable on the internet.

Make sure your printer is properly calibrated before printing the parts.

3D PRINTING SETTINGS

PLA 200°C with 50°C heating plate

Layer height 0.2 mm

Filling 20% in grid

Printing speed 60 mm/s

Please follow the part specific print settings given in the ad image : "Print settings"

Please follow the "Print settings" picture given with the product.