Ralts Evolution - FAN ART - POKÉMON FIGURINE - 3D PRINT MODELHERACROSS

This is "Ralts Evolution" from Pokémon series
I will be releasing my work on daily basis, some may even be free! so please follow and keep your eye on my updates !!cheers

PLEASE CHECK THEM OUT(OTHER 3D MODELS FROM THE SAME DESIGNER)!

Ralts
Ralts is a humanoid Pokémon with a white body. It has thin arms and legs that widen toward the feet. There is a wispy extension trailing off the back of its feet, creating the overall impression of a nightgown or oversized dress. Most of its face is covered by green hair that resembles a bowl cut, but a pair of pinkish-red eyes is sometimes visible. There are two flat, red horns on top of its head: a large one toward the front and a smaller one at the back.

Kirlia
Kirlia is a Psychic/Fairy-type Pokémon introduced in Generation III. Prior to Generation VI, it was a pure Psychic-type.

Gardevoir
Gardevoir is a bipedal, humanoid Pokémon whose body resembles a flowing gown. Most of its body is white, but its hair, arms, and the underside of its gown are green. Its hair curls over its face and down the sides of its head. Behind its red eyes are short spikes, resembling a masquerade mask. It has long arms with three fingers on each hand and slender white legs. A red, fin-like horn extends from its chest, and a shorter, more rounded horn extends from the back. A band of green on its chest extends to the center of the front horn and connects to its sleeve-like arms.

Mega Gardivoir
Mega Gardevoir, it turns almost completely white; only its hair remains green. Its gown becomes longer and wider, resembling a bridal gown. The forearms are slightly thicker with a pointed extension above the elbow. Its facial spikes are larger and now curl upwards. In contrast, its hair is now shorter and more tightly curled. There are now two horns in the center of its chest, extending to either side. These horns are said to be a physical manifestation of this Pokémon's heart, and it is able to use tremendous psychic power now that it is open

Gallade
Gallade is a white, bipedal Pokémon. Its lower body consists of rounded hips with strong legs. It has a thin green torso with sharp, red horns sticking out of its chest and back. Its arms are shaped like tonfas with extendable blades in its elbows. Its head resembles a gladiator's helmet with a white face, red eyes, and a teal head crest. It has spikes on the sides of its face.

*This model require minor support to print with FDM .
*to have a better print result I would suggest to print this model in angle where the front surface facing upwards to avoid support structure in FDM prints, for DLP & SLA should be fine.