Two Part Pegboard Mount for Wyze OUTDOOR CAM

Two Part Pegboard Mount for Wyze OUTDOOR CAM

This design is a remix of my Pegboard mount for a Wyze CAM V2 and V3.

https://www.thingiverse.com/thing:4335549
https://www.thingiverse.com/thing:4880962

This posting contains two files
File 1001 Pegboard Bracket with a Cable Management Slot (Common to all three Wyze CaMS)
File 1002c Wyze Cam V3 Holder. (The Cam Holder also has a 'spring' to help steady and hold the part in the Pegboard Bracket)

While there is a considerable amount of support required to print these objects, it is strongly recommended that the components be printed with the orientation as provided in the files to ensure maximum strength in the components.

Note 1:
The the retaining clip or 'bump' on the part of the Cam V3 Holder that fits into the Pegboard Bracket will lose some of it's memory over time but the reduced force should still be sufficient to steady the unit and offer some resistance to prevent it from falling out.

Note 2:
The components have been designed for a snug fit. If the Cam V3 Holder will not slide into the Pegboard Bracket sand the Cam V3 Holder with a 150 to 200 grit to round the edges and reduce the width.

It is not uncommon to find small variations in pegboard hole sizes. Sometimes the Pegboard Bracket will require a firm push to mount. If the components are printed with four walls and in accordance with the recommended orientation the pegs will be relatively strong and should not break. If the Pegboard Bracket can not be inserted, carefully ream out the pegboard holes to a slightly larger size.

List of all Wyze Pegboard Accessories in the Pegboard Series

This is one in a series of pegboard accessories. The set includes the following items that have been designed for using Wyze products with pegboards.

Check
https://www.thingiverse.com/burke9119/
to see when more are added.
1 Two Part Pegboard Mount for a Wyze CAM V2
https://www.thingiverse.com/thing:4335549
2 Two Part Pegboard Mount for a Wyze Contact Sensor Switch Holder
https://www.thingiverse.com/thing:4337294
3 Wyze Motion Sensor Pegboard Mount
https://www.thingiverse.com/thing:4350830
4 Wyze Vault with Pegboard Mount
https://www.thingiverse.com/thing:4588130
5 Wyze Pegboard Cable Management Kit
https://www.thingiverse.com/thing:4590517
1 Two Part Pegboard Mount for a Wyze CAM V2
https://www.thingiverse.com/thing:4335549
1 Two Part Pegboard Mount for a Wyze CAM V2
https://www.thingiverse.com/thing:4335549

-