Mega GYARADOS - FAN ART - POKÉMON FIGURINE - 3D PRINT MODEL

This is "Mega Gyarados" from Pokémon series
I will be releasing my work on daily basis, some may even be free! so please follow and keep your eye on my updates !!cheers

PLEASE CHECK THEM OUT(OTHER 3D MODELS FROM THE SAME DESIGNER)!

Mega Gyarados is a serpentine Pokémon with a long body covered in slightly overlapping scales. It is mostly blue with a yellow underbelly, and it has a row of yellow spots down each side. Its mouth is very large and gaping, bearing four pointed teeth and yellow lips. It has one barbel and a small white fin on each side of its face. The barbels are white on a female and tan on a male. It has small, red eyes, a three-pointed, dark blue crest on its head, and four white, spiky dorsal fins. Gyarados's tail fin is similar in structure to the crest on its head, except with a thin, white fin spread between the points.

When it Mega Evolves, Gyarados becomes bulkier. The fins on its cheeks become longer and gain a yellow tint. Its crest is larger and black, and its barbels also gain considerable length. A large spike extends downward underneath its chin, and it now has a black underside with a red stripe around the edges. The yellow spots along its body are replaced by raised red scales, which propel Mega Gyarados through the water. Two large yellow fins with blue spines appear on its back. Most of the other fins along its back disappear, replaced by two rows of blue spikes. There are now four yellowish, spiky fins near its tail: two on its back and two on its underside. While its brain has a powerful destructive instinct, it will obey a Trainer it truly trusts. Mega Gyarados is tied with Hoopa Unbound as the tallest Dark-type.

*This model require minor support to print with FDM .
*to have a better print result I would suggest to print this model in angle where the front surface facing upwards to avoid support structure in FDM prints, for DLP & SLA should be fine.