CELBASE MULTITARGET SUPER SMALL (CELL PHONE AND TABLED BASE)

Low cost cell phone base, which contains multiple spaces to place a cell phone depending on its thickness and placed horizontally.

Slots and their measurements:

• Slot for pencil, diameter 0.30

• First slot 0.37 in, 65 degrees.

• Second slot 0.37 in, 90 degrees.

• Third slot 0.45 in, 60 degrees.

• Fifth slot 0.50 in, 90 degrees.

• Sixth slot 0.50, 110 degrees.

*English

Low-cost cell phone base, which contains multiple spaces to place a cell phone depending on its thickness and placed horizontally.

Slots and their measurements:

• Slot for pencil, diameter of 0.30

• First slot 0.37 in, 65 degrees.

• Second slot 0.37 in, 90 degrees.

• Third slot 0.45 in, 60 degrees.

• Fifth slot 0.50 in, 90 degrees.

• Sixth slot 0.50, 110 degrees.

D PRINTING PARAMETERS

LAYER HEIGHT: 0.2 MM

WALL THICKNESS: 1MM

LOWER / UPPER THICKNESS: 1MM

STUFFED

FILLING DENSITY: 15%.

FILLING PATTERN: GRID

PRINT TEMPERATURE: 180 * c

PRINTING PLATE TEMPERATURE: 65 * C

PRINT SPEED: 60 MM / S

ENABLE RETRACTION: YES

Z JUMP IN RETRACTION: YES

FAN SPEED: 10%

TYPE OF PRINT PLATE ADHESION: EDGE

3D PRINTING PARAMETERS

LAYER HEIGHT: 0.2 MM

WALL THICKNESS: 1MM

BOTTOM/TOP THICKNESS: 1MM

FILLING

FILLING DENSITY: 15%.

FILLING PATTERN: GRID

PRINTING TEMPERATURE: 180 *c

PRINTING PLATE TEMPERATURE: 65*C

PRINTING SPEED: 60 MM/S

ENABLE RETRACTION: YES

Z-SKIP ON RETRACTION: YES

FAN SPEED: 10%

TYPE OF PRINTING PLATE ADHESION: EDGE.