Vehicle Pixel Mounts

These were designed to hold bullet nodes on my Camaro. It uses 2 different styles; one has the node/pixel facing forward and the other mounts sideways. This has to do with where the node is placed on the vehicle. They are designed so everything faces forward as it is designed for driving in parades or while sitting in front of the house facing the road. Only nodes facing backwards are mounted on the trunk. It is recommended to watch the video before printing and designing for your vehicle. They mount to 1/4" Polyethylene Tubing (kind used as waterline for a refrigerator).

Printer settings…. CURA Layer height .25, walls, top and bottom layers 4, Infill 20%, cubic pattern, and supports are not needed if you rotate the print.

There are several different suction cup prints. These is due to the different size and types of suction cups used. Recommend if you do not need smaller suction cups to only use the cups with the slide on mounts. They hold better and have had no issues for me. The other cups I had 4 Large and 1 small hole cup fail to hold. The matrix clips use M4 x 20 bolts. There are two different sizes as the door curves. They matrix is mounted using three 95 lb. pull magnets and two suction cups on top and same on the bottom for 6 magnets and 4 suction cups total.
Parts used:
Large Suction cups, these hold the best, use slide mount - https://www.amazon.com/gp/product/B08SMQZ6WC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Large, Medium, and small suction cups, use hole mounts - https://www.amazon.com/dp/B07JJLGL51?psc=1&ref=ppx_yo2_dt_b_product_details
Magnets for bullet mounts - https://www.amazon.com/dp/B0824CT2RW?psc=1&ref=ppx_yo2_dt_b_product_details
Bolts for magnets - https://www.amazon.com/dp/B07H16WK7P?psc=1&ref=ppx_yo2_dt_b_product_details
Watts RPEB 1/4" Polyethylene Tubing, White - https://www.amazon.com/dp/B005LRXYUA?psc=1&ref=ppx_yo2_dt_b_product_details
95 LBS Holding Force Rare Earth magnets- https://www.amazon.com/dp/B07MXVY2S4?psc=1&ref=ppx_yo2_dt_b_product_details

Video of Camaro Build - https://www.youtube.com/watch?v=RmjjU68PgDA
Video of Camaro - https://www.youtube.com/watch?v=aUGXWJ6Wypg

PayPal Donations – If you find this design helpful please donate to help support future creations. Thank You
https://www.paypal.com/paypalme/normanhale1

-