Skip to content

K1 ITX PC Case Modular

Screenshot-2023-03-21-170710.png K1 ITX PC Case Modular
8DE6FFA7-7E46-4093-AF37-EDEA262DBF05.jpeg K1 ITX PC Case Modular
9F7FF523-72FF-4595-B5D5-B9C4231055CA.jpeg K1 ITX PC Case Modular
B7C31BB4-5E7F-4D19-AAFE-926FB6C3E56C.jpeg K1 ITX PC Case Modular
5EFAFE8C-BB8C-4689-AF1B-ADAEF1F70AC9.jpeg K1 ITX PC Case Modular
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 10.4k views
  • 35 likes
  • 174 downloads
License
3D design format
ZIP Folder details Close
  • k1-itx-pc-case-modular-model_files.zip
    • Beam/K1 2023 showpiece dont print!.obj
    • Beam/Main-Beam with 20mm Rad-Fan space.stl
    • Beam/Main-Beam with 25mm Rad-Fan space.stl
    • Riser no inserts/Reverse Riser no inserts.stl
    • Riser no inserts/90 Riser no inserts.stl
    • Front_Bone 4-10 inserts/Front_Bone 12mm Switch.stl
    • Front_Bone 4-10 inserts/Front_Bone 16mm Switch.stl
    • Front_Bone 4-10 inserts/Front_Bone 19mm Switch.stl
    • Front_Bone 4-10 inserts/Front_Bone 22mm Switch.stl
    • Front_Panel no inserts/Front_Panel 12mm Switch.stl
    • Front_Panel no inserts/Front_Panel 16mm Switch.stl
    • Front_Panel no inserts/Front_Panel 19mm switch.stl
    • Front_Panel no inserts/Front_Panel 22mm Switch.stl
    • Middle 8-inserts/Mid G59 C49.stl
    • Middle 8-inserts/Mid G44 C64.stl
    • Middle 8-inserts/Mid G43 C65.stl
    • Middle 8-inserts/Mid G59 C49 no inserts.stl
    • Middle 8-inserts/Mid G44 C64 no inserts.stl
    • Middle 8-inserts/Mid G43 C65 no inserts.stl
    • Middle 8-inserts/PSU bracket no inserts.stl
    • Backplate 4-10 inserts/BackplateQ G59 C49.stl
    • Backplate 4-10 inserts/Backplate G44 C64.stl
    • Backplate 4-10 inserts/Backplate G43 C65.stl
    • Backplate 4-10 inserts/Backplate G59 C49 no inserts.stl
    • Backplate 4-10 inserts/Backplate G44 C64 no inserts.stl
    • Backplate 4-10 inserts/Backplate G43 C65 no inserts.stl
    • Backplate 4-10 inserts/Backplate G44 C64(65) 5mm standoff inserts required.stl
    • Backplate 4-10 inserts/feet.stl
    • Grills/Grill 1.stl
    • Grills/Grill 2.stl
    • Grills/Grill 1 feet.stl
    • Grills/Grill 2 feet.stl
    • Side Panels/Honeycomb 6mm 20x12cm.stl
    • Side Panels/Honeycomb 6mm 20x18cm.stl
    • Side Panels/Triangles 6mm 20x12cm.stl
    • Side Panels/Triangles 6mm 20x18cm.stl
    • Side Panels/Two-tone-Squares 20x12cm.stl
    • Side Panels/Two-tone-Squares 20x18cm.stl
    • Legacy parts no inserts/Reverse Riser + Front Barebone.stl
    • Legacy parts no inserts/90 Riser + Front Barebone.stl
    • Hats adding Height for Fan or Radiator space/10mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/15mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/20mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/25mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/30mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/35mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/40mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/45mm Hat_v2.stl
    • Hats adding Height for Fan or Radiator space/50mm Hat_v2.stl
    • 77399-k1-itx-pc-case-modular-5c318e4d-bcd3-4236-8396-3327a2633f31.pdf

Learn more about the formats
Last update 2023-03-21 at 17:19
Publication date 2021-08-01 at 00:21
Design number 484381
kibora_Kelly

kibora_Kelly

3D printer file info

3D model description

K1 Small-Form-Factor ITX Case

Youtube Assembly Animation 25 seconds

Youtube Assembly Timelapse 100 seconds

Hardware Compatibility:

*GPU Size 290x59x120mm *

| Variation 1 | G 43 | C 65 |
| Variation 2 | G 59 | C 49 |

| GPU thickness | CPU Cooler height |

Dual Radiators

124x282mm x 20mm + hat height
K1 is expandable in it’s height, to accommodate a variety of cooling options from Air cooling up to sophisticated custom loops. Expansion modules are sized from 5-50mm and stackable on each other. K1 starts with 20mm headspace, while the 20mm footspace should be reserved for cable organization.

SFX & SFX-L PSU
| 125x64x130mm |
| --- |
| K1 supports with a rack-slot-System both SFX and SFX-L PSUs. This system allows the PSU to be smoothly pushed into place and can easily accommodate bulky Liquid AIOs through rearranging the Headspace Above the PS. |

Interchangeable Sidepanels

The Sidepanels are held in place by a magnet & nickel-band combo, to provide easy access and easy modification. Sized 20x30x0.3 cm you can easily order custom acrylic-glass from online laser-cut-services or design Sidepanels yourself!

Additional Parts and accessories in my Kofi-shop!

Shoppinglist:

Pcie Riser

choose either one
| Dual reverse riser | 180-200mm |
| 90Β° riser | 200-220mm |

Extension cable & PC Button

| angled C14 to C13 extension cable | 30cm |
| Metal Power Button | at least 15cm |

Screws & Magnets

| 53x | M3x6mm | Countersunk screws |
| 50x | M3x10mm | Countersunk screws |
| 04x | M3x20mm | Countersunk screws |
| 25x | M3 | ruthex Inserts |
| 04x | M3x6mm | Standoff female female |
| 04x | M3x6mm | Panhead Screws |
| 01x | 6-32x6 hex | UNC |
| 20x | D6x3mm | Magnets |
| 1.2m | 10x0.15mm | Nickel-Steel Band |
| 1.2m | 3m 300lse | Doublesided tape |

Printables (https://www.printables.com/model/77399-kibo-k1-itx-case-optimized-for-prusa)

*K1 Product Family Remixes
*

K1 Max 240, K1 Max 280 ATX support

About me

Check out my Website

Youtube Channel more videos in the pipeline!

Small-form-factor Forum

You will find a more detailed development log about the beginnings of the K1.
I am open for any questions or constructive criticism.

3D printing settings

Total Printing Time: 110h

Added Versions with non-requirement of threaded inserts.
I still strongly recommend you to use parts with threaded inserts.
Without them, the parts will split easily between layers.

If you trust your 3D printerπŸ˜’ you could print everything out in a week of time, initiating a print every 12 hours.
12 Prints x 30 min initiating time + 2x 60min scheduled maintaince = 8h

Bed-adhesion: 4mm Brim Recommended
Layerheight: 0.2mm​
Bottom/Top-thickness: 0.8mm​
Wallthickness: 1.2mm​
Innerwall Flow: 102%​
max Speed: 50mm/s​
Infill: 30%​

Categories

All designs β€Ί Various

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.