Iberian Peninsula, spain and portugal do 3D

https://www.thingiverse.com/thing:4918454

Full 135MB 3MF file

https://drive.google.com/file/d/13z7v5XsPHhFC8-NAgcu_wEX3FgnBNfgw/view?usp=sharing

I found a user who makes it easier than me hahahaha.

https://www.thingiverse.com/thing:2186565

GeoFabLab presented their latest creation: TouchTerrain!

http://touchterrain.geol.iastate.edu/

TouchTerrain is a new, free, open-source web application for downloading 3D printable terrain models for anywhere on Earth.

THANK YOU VERY MUCH GeoFabLab.

When I was uploading and reviewing this work I found GeoFabLab.

It has taken me a lot of work to make this map. The sources have been many, editing maps from the internet.

Making a relief from a photo is simply, very easy.

Import the image into any laminator, such as CURA https://ultimaker.com/es/software/ultimaker-cura or,

the one I use, ideaMaker https://www.raise3d.com/ideamaker/.

It directly asks you for parameters to make the image a 3d grayscale representation in height.

In the images you can see the parameters I used.

The print file is in 3mf, because in STL it occupies an exaggeration. Although I put a STL of a resized image so that it occupies only 32 Megas.

Take this file as an example and, you are the ones who decide what resolution and aspect you prefer for the relief of SPAIN.

The most complicated of this has been to build a black and white image of the relief of SPAIN, I share it with everyone because it has been very difficult to get it, in fact, I have made it myself by gathering data from a lot of sites.

To get reliefs of small places you can use this page, https://es-es.topographic-map.com/maps/6olb/Espa%C3%B1a/ then you have to work so that the colors are suitable for the proportional relief with some software to change the whites of the snow for black.

Resize if necessary.

Layer height of 0.1mm, to have a little resolution, but this is to taste, the ideal would be a resin printer.

IMPORTANT, to have good leveling of the printing platform.

IMPORTANT, to have a very good control of the retractions in order not to generate many floating threads.

https://www.thingiverse.com/thing:4918454

135MB full 3MF file

https://drive.google.com/file/d/13z7v5XsPHhFC8-NAgcu_wEX3FgnBNfgw/view?usp=sharing

I found a user who makes it easier than me hahahaha.

https://www.thingiverse.com/thing:2186565

GeoFabLab presented their latest creation: TouchTerrain!

http://touchterrain.geol.iastate.edu/

TouchTerrain is a new, free, open-source web application for downloading 3D printable terrain models for anywhere on Earth.

THANK YOU SO MUCH GeoFabLab.

When I was uploading and reviewing this job I came across GeoFabLab.

It has taken me a lot to make this map. The sources have been many, editing internet maps.

Making a relief of a photo is simply, very easy.

Import the image to any laminator, such as CURA https://ultimaker.com/es/software/ultimaker-cura or,

the one I use, ideaMaker https://www.raise3d.com/ideamaker/.

It directly asks you for parameters to make the image a 3d representation of the gray scale in height.

In the images I put the parameters that I have used.

The print file is in 3mf, because in STL it occupies an exaggeration. Although I put an STL of a resized image so that it occupies only 32 megabytes.

Take this file as an example and be the ones to decide what resolution and aspect you prefer for the relief of SPAIN.

The most complicated part of this has been to build a black and white image of the relief of SPAIN, I share it with everyone because it has been very difficult to get it, in fact, I have made it by gathering data from a lot of sites.

To make reliefs of small sites you can use this page, https://es-es.topographic-map.com/maps/6olb/Espa%C3%B1a/ then you have to work so that the colors are suitable for the proportional relief with some software change the whites of the snow to black.

Resize if necessary.

0.1mm layer height, to have a bit of resolution, but this is to taste, the ideal would be a resin printer.

IMPORTANT, have good leveling of the printing platform.

IMPORTANT, have a very good control of retractions so as not to generate many floating threads.

-