Pontoon Rail Fender Hanger 1.0 inch mount marine Bimini Kayak Canoe Boat Yacht Motorboat ph-03 3d print and cnc

Pontoon Rail Fender Hanger 1.0 inch mount marine Bimini Kayak Canoe Boat Yacht Motorboat ph-03 3d print and cnc

Nylon 12 Nylon 13 recommend to use

STRONG HIGH-IMPACT BOAT FENDER HANGERS: Designed with more durable model, these fender hanger clips easily attach and reposition your fenders without broken. Don’t worry lost your fenders/ bumpers when you parked your boat at a marina.
ATTACHED A BOLT FOR ONE FENDER HANGER: stable and won’t slip in your square pontoon rails. They hold adequately tight the hangers, won’t pop off the railing in choppy.
UNIVERSAL S-SHAPE DESIGN: It takes the stress of bumpers when choppy skillfully. Fits on 0.8"- 1” square tube rails of pontoon boats, easy to slide it back and forth along the rail for the ultimate precision fit for any docking situation.
FIT IN DIFFERENT PONTOON BOAT FENDER: The 2/5” hole for the rope is perfect fitting in your 3/8” line. Secures pontoon rail fender line up to 3/8". and adjust the length of rope for various applications.
YOUR NEATER CHOICE: Hanging a fender with it, let your boat does look better than looping the rope over the rail, and they look much neater. Removes the hassle of constantly tying and untying fender lines from your rails. Unfasten and stow away in seconds.

Easy installation with 1 fixing screw iso din m8.

Model initially created by solidmade.

Ideal for installation on boats and yachts.

Colgador de guardabarros de riel de pontón, montaje de 1,0 pulgadas, bimini marino, kayak, canoa, barco, yate, barco a motor, impresión 3d y cnc

Nylon 12 Se recomienda usar Nylon 13

COLGADORES DE GUARDABARROS PARA BARCOS FUERTES DE ALTO IMPACTO: diseñados con un modelo más duradero, estos clips para colgar guardabarros se fijan y reposicionan fácilmente sus guardabarros sin romperse. No se preocupe por perder sus guardabarros / parachoques cuando estacionó su bote en un puerto deportivo.
COLOCÓ UN PERNO PARA UNA PERCHA DE GUARDABARROS: estable y no se deslizará en los rieles cuadrados de su pontón. Sostienen adecuadamente las perchas, no saldrán de la barandilla entrecortadas.
DISEÑO UNIVERSAL EN FORMA DE S: elimina el estrés de los parachoques cuando se pican con habilidad. Se adapta a los rieles de tubo cuadrado de 0.8 "- 1" de los botes pontones, es fácil de deslizar hacia adelante y hacia atrás a lo largo del riel para un ajuste de máxima precisión para cualquier situación de atraque.
ENCAJE EN DIFERENTES GUARDABARROS DE BOTE DE PONTOON: El orificio de 2/5 "para la cuerda encaja perfectamente en su línea de 3/8". Asegura la línea del guardabarros del riel del pontón hasta 3/8 ". Y ajusta la longitud de la cuerda para diversas aplicaciones.
SU ELECCIÓN MÁS CERCANA: colgando un guardabarros con él, deje que su bote se vea mejor que enrollar la cuerda sobre la barandilla, y se verá mucho más ordenado. Elimina la molestia de atar y desatar constantemente las líneas de los guardabarros de los rieles. Desabrocha y guarda en segundos.

Fácil instalación con 1 tornillo de fijación iso din m8.

Modelo creado inicialmente por solidmade.

Ideal para instalación en barcos y yates.

Ponton Rail Fender Hanger 1.0 pouces monture marine Bimini Kayak Canoe Boat Yacht Motorboat impression 3d et cnc

Nylon 12 Nylon 13 recommandé d'utiliser

SUPPORTS DE GARDE-BOUE DE BATEAU FORTS À IMPACT ÉLEVÉ: Conçus avec un modèle plus durable, ces clips de suspension de garde-boue se fixent et repositionnent facilement vos garde-boue sans les casser. Ne vous inquiétez pas, vous avez perdu vos ailes / pare-chocs lorsque vous avez garé votre bateau dans une marina.
FIXE UN BOULON POUR UN SUPPORT DE FENDER: stable et ne glissera pas dans vos rails de ponton carrés. Ils tiennent suffisamment serré les cintres, ne se détacheront pas de la balustrade dans le clapot.
CONCEPTION UNIVERSELLE EN FORME DE S: Il supporte le stress des pare-chocs lorsqu'il est habilement agité. S'adapte sur les rails en tube carré de 0,8" à 1" des bateaux pontons, il est facile de le faire glisser d'avant en arrière le long du rail pour un ajustement de précision ultime pour toute situation d'amarrage.
S'ADAPTE À DIFFÉRENTES GARDE-BOUE DE PONTON: Le trou de 2/5" pour la corde s'adapte parfaitement à votre ligne de 3/8". Sécurise la ligne de garde-boue de ponton jusqu'à 3/8 "et ajuste la longueur de la corde pour diverses applications.
VOTRE CHOIX PLUS PROPRE: Suspendez un garde-boue avec, laissez votre bateau avoir l'air mieux que de boucler la corde sur le rail, et ils ont l'air beaucoup plus soignés. Élimine les tracas d'attacher et de détacher constamment les lignes de garde-boue de vos rails. Détachez et rangez en quelques secondes.

Installation facile avec 1 vis de fixation iso din m8.

Modèle initialement créé par solidmade.

Idéal pour une installation sur des bateaux et des yachts.

---

You can make the product on a 3D printer or cnc machine from plastic, glass, clay and any materials.
the model can also be made using cnc machine turning wood.Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.

The size is shown in the scetch or drawings.
the model is easily scaled to the desired size when using your 3D printing software

Render scene is not included.

Suitable for graphical projects and 3D print or cnc projects.

Everything can be seen in the photo.

the model is easily scaled in any program for printing, etc.

The model can be printed as a 3D model, as well as produced on CNC machines.

Made in solidmade, tested in the manufacture of the master model of the product.

Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.

This is a fully solid-state version for 3d-print, this is not a scan version.

At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

It is possible to model anyone another model according to your size or drawings and sketches.

ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.

The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.

Its files For CNC Routers and 3D printers.

Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

All copyrights to these hosted models belong to the author.

Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.

Non-commercial use only.
Attribution-NonCommercial CC BY-NC