mooring duck boat yacht pontoon bollard Folding Cleat Flip-up Dock Cleat Marine Nylon fu-03 for 3d print and cnc

mooring duck boat yacht pontoon bollard Folding Cleat Flip-up Dock Cleat Marine Nylon fu-03 for 3d print and cnc

The Cleat folded down so swimmer would not catch a foot on them when plating and diving off the dock
4 screw holes, more stable than the traditional 2 screw holes.

• Heavy duty and high strength boat Yacht deck mooring open top flat base clip

• Easy installation, durability and corrosion resistance

-Multiple applications such as Sea Boat, trucks, van, caravan, trailers, pontoon, docking station

• Universal fit, suitable for both indoor and outdoor use

• a face for a smooth appearance and compliance with modern water crafts

mooring duck is attached to the hull in any position with 4 m4 screws with a depth of 30 mm

reinforced abs, nylon or petg print design!!

Ideal for installation on boats and yachts.

install tree supports from printer table in Cura

Anlegestelle Ente Boot Yacht Ponton Poller Faltbare Klampe Flip-up Dock Klampe Marine Nylon fu-03 für 3D-Druck und CNC

Die Klampe wurde heruntergeklappt, damit der Schwimmer beim Überziehen und Tauchen vom Dock keinen Fuß darauf verfangen konnte
4 Schraubenlöcher, stabiler als die herkömmlichen 2 Schraubenlöcher.

• Strapazierfähiges und hochfestes Boot Yacht-Deckverankerung oben offener flacher Basisclip

• Einfache Installation, Haltbarkeit und Korrosionsbeständigkeit

-Mehrere Anwendungen wie Sea Boat, Trucks, Van, Caravan, Trailer, Ponton, Docking Station

• Universelle Passform, sowohl für den Innen- als auch für den Außenbereich geeignet

• ein Gesicht für ein glattes Erscheinungsbild und die Einhaltung moderner Wasserfahrzeuge

Festmacherente wird in beliebiger Position mit 4 m4 Schrauben mit einer Tiefe von 30 mm am Rumpf befestigt

verstärkte Bauchmuskeln, Nylon oder Petg-Print-Design !!

Ideal für die Installation auf Booten und Yachten.

canard d'amarrage bateau yacht ponton borne taquet pliant taquet de quai rabattable en nylon marin fu-03 pour impression 3d et cnc

Le taquet s'est replié pour que le nageur n'attrape pas un pied dessus lors du placage et de la plongée hors du quai
4 trous de vis, plus stables que les 2 trous de vis traditionnels.

• Clip de base plat à dessus ouvert pour amarrage de pont de yacht de bateau robuste et haute résistance

• Installation facile, durabilité et résistance à la corrosion

-Applications multiples telles que bateau de mer, camions, fourgonnette, caravane, remorques, ponton, station d'accueil

• Ajustement universel, adapté à une utilisation intérieure et extérieure

• un visage pour un aspect lisse et le respect des embarcations modernes

canard d'amarrage est fixé à la coque dans n'importe quelle position avec 4 vis m4 d'une profondeur de 30 mm

conception d'impression ABS renforcée, nylon ou petg !!

Idéal pour une installation sur des bateaux et des yachts.

Amarre pato barco yate pontón bolardo Grapa plegable Grapa de muelle abatible Nylon marino fu-03 para impresión 3d y cnc

El taco se dobló hacia abajo para que el nadador no pillara un pie con ellos cuando se bañaba y se zambullía desde el muelle.
4 orificios para tornillos, más estable que los 2 orificios para tornillos tradicionales.

• Abrazadera de base plana superior abierta para amarre en la cubierta del yate para barcos de alta resistencia y alta resistencia

• Fácil instalación, durabilidad y resistencia a la corrosión.

-Múltiples aplicaciones como Sea Boat, camiones, furgonetas, caravanas, remolques, pontones, estaciones de acoplamiento

• Ajuste universal, adecuado para uso tanto en interiores como en exteriores

• una cara para una apariencia suave y el cumplimiento de las modernas embarcaciones acuáticas

El pato de amarre se fija al casco en cualquier posición con 4 tornillos m4 con una profundidad de 30 mm

ABS reforzado, nailon o diseño con estampado petg.

Ideal para instalación en barcos y yates.

amarração pato barco iate pontão bollard Grampo dobrável flip-up dock grampo marinho Nylon fu-03 para impressão 3D e cnc

A presilha dobrada para baixo para que o nadador não pegasse um pé nelas ao chapinhar e mergulhar da doca
4 orifícios de parafuso, mais estáveis ​​do que os 2 orifícios de parafuso tradicionais.

• Barco pesado e de alta resistência Yacht convés de amarração com clipe de base plana superior aberta

• Fácil instalação, durabilidade e resistência à corrosão

• Várias aplicações, como barco marítimo, caminhões, van, caravana, reboques, pontão, estação de ancoragem

• Ajuste universal, adequado para uso interno e externo

• um rosto para uma aparência suave e conformidade com as embarcações modernas

O pato de amarração é preso ao casco em qualquer posição com parafusos de 4 m4 com profundidade de 30 mm

abs reforçado, nylon ou design de impressão petg !!

Ideal para instalação em barcos e iates.

---

You can make the product on a 3D printer or cnc machine from steel, aluminium, plastic, glass, clay, teak tree and any materials.
the model can also be made using cnc machine turning wood.Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.

The size is shown in the scetch or drawings.
the model is easily scaled to the desired size when using your 3D printing software

Render scene is not included.

Suitable for graphical projects and 3D print or cnc projects.

Everything can be seen in the photo.

the model is easily scaled in any program for printing, etc.

The model can be printed as a 3D model, as well as produced on CNC machines.

Made in solidmade, tested in the manufacture of the master model of the product.

Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.

This is a fully solid-state version for 3d-print, this is not a scan version.

At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

It is possible to model anyone another model according to your size or drawings and sketches.

ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.

The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.

Its files For CNC Routers and 3D printers.

Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

All copyrights to these hosted models belong to the author.

Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.

Non-commercial use only.
Attribution-NonCommercial CC BY-NC

install tree supports from printer table in Cura