Adjustable Pontoon Boat Square Rail Fender Cleat/Clip/Hanger for Bumper mount marine Bimini Kayak Canoe Boat Yacht Motorboat ph-04 3d print and cnc

Adjustable Pontoon Boat Square Rail Fender Cleat/Clip/Hanger for Bumper mount marine Bimini Kayak Canoe Boat Yacht Motorboat ph-04 3d print and cnc

Nylon 12 Nylon 13 or ABS recommend to use

This pontoon boat rail fender cleat can help you adjust the position of the fender easily and quickly to suit different docking situation.

This pontoon rail fender clip is designed to clamp on 1 inch and 1.25 inch square tube rails securely, but can be repositioned quickly and easily, which solves the problem of constantly lashing and unfastening fender lines on the rails, save time and effort.
(Applicable) Suitable for 1 / 4 to 3 / 8 inch fender line, the height of the fender can be adjusted easily, and the fender can be fixed firmly by pressing the rope into the groove of the fender cleat after determining the height of the fender.
(Material) The pontoon boat clip constructed from Nylon or ABS material is durable and will not scratch the paint of your boat rail. The surface is smooth and don't worry about scratching your sofa on your pontoon boat.

Model initially created by solidmade.

Ideal for installation on boats and yachts.

Taquet/clip/cintre réglable de garde-boue de rail carré de bateau de ponton pour le bâti de pare-chocs marin Bimini Kayak canoë bateau yacht bateau à moteur ph-04 impression 3d et cnc

Nylon 12 Nylon 13 ou ABS recommandé d'utiliser

Ce taquet de garde-boue de rail de bateau ponton peut vous aider à ajuster la position du garde-boue facilement et rapidement pour s'adapter à différentes situations d'amarrage.

Ce clip de garde-boue de ponton est conçu pour serrer en toute sécurité des rails de tube carré de 1 pouce et 1,25 pouce, mais peut être repositionné rapidement et facilement, ce qui résout le problème de l'arrimage et du détachement constants des lignes de garde-boue sur les rails, économisez du temps et des efforts.
(Applicable) Convient pour une ligne de garde-boue de 1/4 à 3/8 pouces, la hauteur du garde-boue peut être ajustée facilement et le garde-boue peut être fixé fermement en appuyant sur la corde dans la rainure du taquet de garde-boue après avoir déterminé la hauteur du aile.
(Matériau) Le clip de bateau ponton construit en nylon ou en ABS est durable et ne rayera pas la peinture du rail de votre bateau. La surface est lisse et ne vous inquiétez pas de rayer votre canapé sur votre bateau ponton.

Modèle initialement créé par solidmade.

Idéal pour une installation sur des bateaux et des yachts.

Stillanlegur Pontoon Boat Square Rail Fender Cleat/Clip/Hanger fyrir stuðara fjall sjávar Bimini Kayak Canoe Boat Yacht Motorboat ph-04 3d prenta og cnc

Nylon 12 Nylon 13 eða ABS mælum með að nota

Þessi skúffuklútur í ponton bátsbraut getur hjálpað þér að stilla stöðu skjólsins auðveldlega og fljótt þannig að það henti mismunandi aðstæðum við bryggju.

Þessi hlífðarspjaldaklemma í ponton er hönnuð til að festa á 1 tommu og 1,25 tommu ferningshólkar á öruggan hátt, en hægt er að staðsetja þau fljótt og auðveldlega, sem leysir vandamálið við að stöðugt festa og losna fender línur á teinunum, spara tíma og fyrirhöfn.
(Gildir) Hentar fyrir 1 /4 til 3 /8 tommu fender línu, hægt er að stilla hæð skjólsins auðveldlega og festa festinguna þétt með því að þrýsta reipinu í grindina á fender cleat eftir að hafa ákvarðað hæð hlíf.
(Efni) Ponton -bátaklemman sem er smíðuð úr næloni eða ABS efni er endingargóð og mun ekki klóra málningu bátsbrautarinnar þinnar. Yfirborðið er slétt og ekki hafa áhyggjur af því að klóra í sófanum á pontonbátnum þínum.

Líkan upphaflega búið til af solidmade.

Tilvalið til uppsetningar á bátum og snekkjum.

Pontón ajustable para barco, riel cuadrado, guardabarros, grapa / clip / suspensión para montaje en parachoques, bimini marino, kayak, canoa, barco, yate, lancha a motor ph-04, impresión 3d y cnc

Nylon 12 Nylon 13 o ABS se recomienda usar

Esta cala de guardabarros para riel de barco de pontón puede ayudarlo a ajustar la posición del guardabarros fácil y rápidamente para adaptarse a diferentes situaciones de atraque.

Este clip para guardabarros de riel de pontón está diseñado para sujetar rieles de tubo cuadrado de 1 pulgada y 1,25 pulgadas de forma segura, pero se puede reposicionar rápida y fácilmente, lo que resuelve el problema de amarrar y desabrochar constantemente las líneas de los guardabarros en los rieles, ahorrando tiempo y esfuerzo.
(Aplicable) Adecuado para una línea de guardabarros de 1/4 a 3/8 de pulgada, la altura del guardabarros se puede ajustar fácilmente y el guardabarros se puede fijar firmemente presionando la cuerda en la ranura de la abrazadera del guardabarros después de determinar la altura de la defensa.
(Material) El clip para botes de pontón construido con nailon o material ABS es duradero y no rayará la pintura del riel de su bote. La superficie es lisa y no se preocupe por rayar su sofá en su bote pontón.

Modelo creado inicialmente por solidmade.

Ideal para instalación en barcos y yates.

Presilha / grampo / cabide para montagem de pára-choques marinho Bimini Caiaque Canoa Iate Barco a motor ph-04 impressão 3D e cnc

Nylon 12 Nylon 13 ou ABS recomendado para uso

Esta presilha do para-lama pode ajudá-lo a ajustar a posição do para-lama com facilidade e rapidez para se adequar a diferentes situações de encaixe.

Este clipe de para-lama é projetado para prender trilhos de tubo quadrado de 1 polegada e 1,25 polegada com segurança, mas pode ser reposicionada de forma rápida e fácil, o que resolve o problema de amarrar e desatar constantemente as linhas de para-lama nos trilhos, economizando tempo e esforço.
(Aplicável) Adequado para linha de guarda-lamas de 1/4 a 3/8 de polegada, a altura do guarda-lamas pode ser ajustada facilmente e o guarda-lamas pode ser fixado firmemente pressionando a corda na ranhura da presilha do guarda-lamas após determinar a altura do pára-choque.
(Material) O clipe do pontão construído em Nylon ou material ABS é durável e não risca a pintura do trilho do barco. A superfície é lisa e não se preocupe em arranhar o sofá no barco do pontão.

Modelo inicialmente criado por solidmade.

Ideal para instalação em barcos e iates.

Verstellbares Pontonboot Square Rail Fender Cleat/Clip/Hänger für Bumper Mount Marine Bimini Kajak Kanu Boot Yacht Motorboot ph-04 3D-Druck und CNC

Nylon 12 Nylon 13 oder ABS empfehlen zu verwenden

Diese Fender-Klampe für Pontonboote kann Ihnen helfen, die Position des Fenders einfach und schnell an unterschiedliche Andocksituationen anzupassen.

Dieser Pontonschienen-Fenderclip ist zum sicheren Klemmen an 1 Zoll und 1,25 Zoll Vierkantrohrschienen konzipiert, kann aber schnell und einfach umpositioniert werden, was das Problem des ständigen Verzurrens und Lösens von Fenderleinen an den Schienen löst, Zeit und Mühe spart.
(Anwendbar) Geeignet für 1 / 4 bis 3 / 8 Zoll Kotflügellinie, die Höhe des Kotflügels kann leicht eingestellt werden und der Kotflügel kann durch Drücken des Seils in die Nut der Kotflügelklemme nach der Ermittlung der Höhe des Kotflügels fest fixiert werden Fender.
(Material) Der Ponton-Bootsclip aus Nylon- oder ABS-Material ist langlebig und zerkratzt nicht den Lack Ihrer Bootsreling. Die Oberfläche ist glatt und Sie müssen sich keine Sorgen machen, Ihr Sofa auf Ihrem Pontonboot zu zerkratzen.

Ursprünglich von solidmade erstelltes Modell.

Ideal für die Installation auf Booten und Yachten.

---

You can make the product on a 3D printer or cnc machine from plastic, glass, clay and any materials.
the model can also be made using cnc machine turning wood.Also the model can be executions in castings.
If necessary, I can make injection molds for pouring on a separate order for an agreed payment.

The size is shown in the scetch or drawings.
the model is easily scaled to the desired size when using your 3D printing software

Render scene is not included.

Suitable for graphical projects and 3D print or cnc projects.

Everything can be seen in the photo.

the model is easily scaled in any program for printing, etc.

The model can be printed as a 3D model, as well as produced on CNC machines.

Made in solidmade, tested in the manufacture of the master model of the product.

Saving stl & obj files occurs at the average values of polygons. This is usually enough to print a model in a 3D printer,
but it may not be enough when producing a model on a CNC machine. In this case, please contact, it is possible to save files
at high values, but this will give a sharp increase in file size.

This is a fully solid-state version for 3d-print, this is not a scan version.

At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

It is possible to model anyone another model according to your size or drawings and sketches.

ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D,Simplify3D, Cura and
anyone software applications for CNC and 3D printers.

The settings for the Cura slicer are shown for example and to understand that the slicer does not produce errors.
To print prototypes, this is usually enough to evaluate the suitability of the model for the intended image. The specific settings
should depend on your printer and the filament used for printing.

Its files For CNC Routers and 3D printers.

Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

All copyrights to these hosted models belong to the author.

Models are placed for manufacture and personal use in any quantity and any color, without selling the produced models.

Non-commercial use only.

Attribution-NonCommercial CC BY-NC