Adam & Eve
$19.99 Adam & Eve
Published 2021-08-09T09:02:32+00:00
Adam & Eve
This is a sculpt that I had an initial idea for a while ago, sketched out on paper. I eventually realised it in 3D using Oculus Medium in VR. Influenced by the art Giger and the imagery of Lovecraft mythologies likea lot of my sculpts.
It took a while before I managed to process this into a version that could be 3D printed. The 3D print version was created in Zbrush and took several atempts before I finally worked out how to print it in a way that would preserve all the details and entwined forms.
I have included supported and unsupprted STL files along with supported Chitubox files for those who use Chitubox.
I have included the main body of the print as a sinle piece STL for those with a larger form printer.
There should be no print issues although you do have to make sure to centre correctly if you are using Elegoo Mars or similar size printer as this print JUST fits onto the print plate and if you are off you may miss a tiny edge off the print.
Assembly will require some filling along the join before painting but the two halves do fit neatly together so filling should be minimal.
Date published | 09/08/2021 |
Price | $19.99 |
Time to do | 3000 - minutes |
Material Quantity | 200g |
Dimensions | 105mm x 113mm x 170mm |