Cardcade Character Card Holder for Marvel Crisis Protocol

NOTICE: THIS IS A DIGITAL STL FILE TO BE USED FOR 3D PRINTING. THIS IS NOT A PHYSICAL PRODUCT.

This card holder was designed to hold approximately 100 sleeved (top loader) character cards for Marvel Crisis Protocol, but also has magnetic lid features and a removable tool holder piece for the front entrance! Use it as storage and terrain.

The files included can be scaled to fit other sized cards and sleeves. The box comes scaled for Marvel Crisis Protocol to be used as Size 5 terrain.

The product images in the pictures may slightly differ from the product you print. You may see slight flaws in the print and areas on the print may be sharp. Each character card holder printed should be carefully inspected before use.

The STL Bundle will include access to all of the files listed in the last photo in a zipped folder:
- The Cardcade box/terrain with (Magnetic)
- Tool holder entrance insert
- Marvel tool holder entrance insert
- The Main Lid/Roof (Magnetic)
- Roof with additional holes for magnets to magnetize roof accessories
- The Cardcade Entrance Roof (Joystick/Flat Options)
- Two different awnings to use (Rounded or Slanted)
- Cardcade sign
- Roof Window
- AC Unit

MAGNETS: 5mm (diameter) x 3mm (height)
Install with a dab of super glue in holes. Check polarity for lids and structure before securing.

Legal Notice: Marvel is a trademark of Marvel/Disney and Marvel Crisis Protocol is produced by Atomic Mass Games and distributed by Asmodee. This product and I are in no way associated with Marvel/Disney or Atomic Mass Games and this is work of my own design and making.

The purchase of these files does not give the owner permission to resell any of the files or products created from the files. If you would like to sell finished products, please contact the Etsy store owner for inquiries.

Print at 0.16 - 0.2 layer height
Infill 10-20%
Suggest 3 Outer Walls
Print standing up with base of cardholder on build-plate
No supports needed
May want to use brim for better build plate adhesion
Print all files the way they are orientated

100% Scale Dimensions of largest object:
196mm (X) x 201mm (Y) x 167mm (Z)