Skip to content

HyperCube 3030 Version with 300x200 Bed

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 428 views
  • 1 like
  • 14 downloads
License
3D design format
DXF, RAR, STL, and ZIP Folder details Close
  • 12864Case_Bottom.stl
  • 12864Case_Button.stl
  • 12864Case_Knob.stl
  • 12864Case_Knob_Cap.stl
  • 12864Case_Top.stl
  • 12864_back_board.2.stl
  • 3030_Cable_Clip_10mm.stl
  • 3030_SquareHolder.stl
  • 3030_SquareHolder_30mm.stl
  • 3030_SquareHolder_35mm.stl
  • 3030_leg.stl
  • 3030_leg_foot.stl
  • Bed_Support_v1.1.stl
  • Bed_Support_v1.2.stl
  • Bottom_Plate_5mm.dxf
  • Bottom_Plate_Holder_3030.stl
  • Configuration_Marlin_1.1.6.zip
    • Configuration_adv.h
    • Configuration.h
  • Configuration_Marlin_1.1.8_With_ZProbe.rar
  • Corner_Led_Bracket.stl
  • HyperCube_3030.rar
  • LMK12LUU_Bed_Holder.stl
  • SK12.stl
  • XY_Clamp_v1.1.stl
  • XY_Idler_F623ZZ.stl
  • XY_Idler_GT2_16T.stl
  • XY_Idler_GT2_16TPulley.stl
  • XY_Motor_left-1degre.stl
  • XY_Motor_left.stl
  • XY_Motor_right-1degre.stl
  • XY_Motor_right.stl
  • X_Carriage.stl
  • X_Carriage_Alternative.stl
  • X_Carriage_E3D_Clamp.stl
  • X_Carriage_Fan_Shroud_43mm.stl
  • X_Carriage_Fan_Shroud_44mm.stl
  • X_Carriage_Fan_Shroud_45mm.stl
  • X_Carriage_Fan_Shroud_46mm.stl
  • X_Carriage_Fan_Shroud_47mm.stl
  • X_Carriage_X_Belt_Lock.stl
  • Y_EndStop_Holder.stl
  • Y_Shaft_Clamp.stl
  • Y_Shaft_Clamp_Left_Motor.stl
  • Z_Motor-v1.1-3030.stl
  • Z_leadscrew_support-v1.1-3030.stl
  • Z_nut_mount_v1.1.stl
  • spoolHolderBracket_HyperCube_3030-2.stl
  • spoolHolderBracket_HyperCube_3030.stl
  • xy_joiner_v1_1_long_clamps_10mm.stl
  • xy_joiner_v1_1_long_clamps_8mm.stl

Learn more about the formats
Publication date 2021-08-15 at 23:09
?
Published to Thingiverse on: 2017-07-25 at 22:18
Design number 496065
s3rkan

s3rkan

Template info

3D model description

UPDATES:
08.05.2018: .stp file is updated. configuration.h file for Marlin 1.1.8 is added (suitable for my Z-Probe design).
25.04.2018: Case for 12864 controller is added. 4 of brass inserts (M3*5*5mm OD 5mm) are needed for assembly.
https://www.aliexpress.com/item/100PCS-M3-5-5mm-OD-5mm-Brass-Inserts-Double-Pass-Copper-Knurl-Nut-Embedded-Fastener/32822621373.html
19.10.2017: Added configuration.h and configuration.adv files for Marlin 1.1.6. I have configured the files for my new carriage: https://www.thingiverse.com/thing:2551717 Please change the necessary sections for your printer like Z step per unit, printer name...
25.09.2017: New X carriage is out: https://www.thingiverse.com/thing:2551717 In action video:
https://www.youtube.com/watch?v=5Fln4nKIfVA
30.07.2017: Added source files of whole design as HyperCube 3030 Design Files.zip

You will need 3030 extrusions: 460mm x 4 (X), 333mm x 4 (Y), 450mm x 4 (Z) for the main frame. For the bed (2020): 235mm x 2, 290mm x 2, For the gantry you will need 490mm x 2 steel rods
For the parts that attached to the main frame you should use m6 x 12 bolts and for the bed parts use m5 x 10
Here are some notes about some parts:
* 3030_Leg and foot: It uses m8x60mm bolt and nut
* 3030_SquareHolder: Use it if you don't want to use the aluminum ones
* 12864_Back_Board: It is for this design: https://www.thingiverse.com/thing:1676899
* Bed_Support_v1.1 and v1.2: Choose what you want
* SK12: Print 4 of this design and instead of original Z bar holders
* SpoolHolderBracket: It needs two 608zz and a 8mm steel rod in 105mm length
* X _Carriage_Alternative: Use "Seperate Connected Surfaces" in Simplify3d to seperate the parts or you can find the details here: https://www.thingiverse.com/thing:2379178
* XY_Idler...: Choose which you want to use
* XY_Joiner: Remixed from here: https://www.thingiverse.com/thing:2192301
* XY_Motor_left-1degre and XY_Motor_right-1degre: If you are using vibration dampener, you may want to use these designs to compensate the deflection of the stepper
* Y_EndStop_Holder: For 20x6.5mm mechanical endstops
* Corner_Led_Bracket: For more information visit here: https://www.thingiverse.com/thing:2164017
* LMK12LUU_Bed_Holder: Should be mirrored for the other side
* X_Carriage: For more information visit here: https://www.thingiverse.com/thing:2425642
Bottom_Plate_Holders: Cut a bottom plate to place the arduino, powersupply, fan according to the dxf file. Than you can fix these components with m3 screws to this plate whereever you want.
* For extruder, I am using this design:
https://www.thingiverse.com/thing:2348459

Manufacturing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.