Pikachu Cookie Cutter (2 parts) / Cortante de galleta de Pikachu(2 Parts)

Get this beautiful Pikachu Cookie Cutter and add some magic and fun to your snacks!

This Cookie Cutter consists in 2 parts: the cutter and the plunger.

How to use: Take your cookie dough to your fridge 15 minutes, so this way the dough will be harder.

Then use the cutter to get the shape of the character, and after that

use the plunger to give details to the cookie.

This way your cookies will always look awesome!

We used a color-change at the last layers for the plunger, so it has more detail, just for the visuals.

Cutter designed by Abigaíl Flores. STL files from Javier Lardieri.

We are Geek Fury! Check our profile for other designs and packs.

Beautiful Bulbasaur cutter to give all your cookies a magical touch!

This cutter consists of 2 parts: the cutter and the stamp.

How to use it: First take the dough to the freezer or refrigerator for 15 minutes. This way the dough will be harder and you will be able to get better definition in the cookie.

Then use the cutter to separate the shape, and finally the stamp to give details.

This way your cookies will always look amazing!

We used a color change on the last layers of the stamp to give it more detail, but it's an aesthetic detail.

Cutter designed by Abigaíl Flores, STL files by Javier Lardieri.

We are Geek Fury! Check our profile for more models and packs.

For the Cutter / Para el cortante:

Layer Height: 0.2

Layer Width: 0.4

Wall Line Count: 3

Top/Bottom Layers: 3

Infill: 20%

Flow: 100% Flow: 100% Flow: 100% Flow: 100% Flow: 100% Flow: 100% Flow: 100% Flow: 100%

Speed: 45

**Combing mode set to OFF, please be sure to have your retractions calibrated.

We do NOT use COMBING for this print, please be sure to have your retractions calibrated.

For the Plunger/Para el sello:

Same settings, but set the Inner Layer Width to 0.6.

Same settings, but set the Inner Layer Width to 0.6.