Print in Place Durable and Stylish Phone Holder
This object is currently under review. We cannot guarantee its printability just yet but this object is shareable and people with this link will be able to see and download it. If you would like to help us guarantee the printability of this object, please upload a picture of it printed.
Print in Place Durable and Stylish Phone Holder
Published 2021-08-16T15:57:11+00:00
This is a print-in-place phone holder that is made of 2 pieces. The pieces cannot be separated from each other.
It has a gear-like locking mechanism inside. You need to move the leg to the left to unlock it, adjust the angle and then move right again to lock it. Very hard to break and safe for even children.
Enjoy!
Edit: V2 is now online! The gear-lock mechanism has been improved. It is now made of triangles instead of rectangles and the gap between the parts has been reduced. Therefore now it supports more angle options! Pictures belong to V1 but when you download the STL, you will get the V2. Enjoy!
It only needs a small amount of support under the upper circle. I recommend using tree support with it. My settings are 0.2 mm layer, 70 mm/s speed, %10 infill, 2 walls, 5.5 mm retraction with 35 mm/s retraction speed. No need to use a brim or a raft.
Date published | 16/08/2021 |
Time to do | 4 - 30 minutes |
Material Quantity | 33 grams |