Voxelab Aquila All Tool Holder

The wife bought me a Voxelab Aquila Printer and i immediately recognized it to be an Ender 3 v2 clone. so i had to get to modding it right away and seeing what exactly is different.

Thanks to That_Jamie_S_Guy for the original part! since the frame of the voxelab printer is identical to the ender printers, i went ahead and slimmed this tool holder down and added the Aquila name to it. i have uploaded a file without a name (Blank) and a file with the name. pictures are of the v1 file(Removed) without name and will be updated soon!

UPDATE 1/16/2021 first print went great! i quickly learned that the smaller wrench that came with the Aquila was slightly wider than what ender sends, i widened this slot and it should fit fine now. i also removed the smallest hole where the allen keys sit to shrink it down a bit more and i added two new holes(then filled one) for the screw drivers. all should be perfect now but let me know if there are any issues!!

UPDATE 1/17/2021 I realized i was missing one of the allen keys in my tool holder when i found it on the ground. part has been reworked again to add the 5th allen hole back in and spacing on the screw drivers has been increased slightly. this should be the final design. (v2 file replaced with v3) i will update pictures soon.

Stay tuned as i mod my Voxelab Aquila further, i will upload all files so you can do the same! full x/y/z axis cable chain upload coming shortly(there are slight differences in the files from an ender v2) as well as a GREAT filament guide!

i have printed almost all my Aquila mods on my MP mini v2 and has been working awesome!

Thanks!

-