Airsoft Martini-Henry Mk.II carbine

UPDATE 2: a Manual for printing, assembling and using the rifle has been released as well as new versions of the receiver and Handguard. This was to help increase strength between the two parts. Shooting video to be made as soon as possible. New projects coming soon!

UPDATE 1: added Sawn off grip as it wasn't previously in the files.

An airsoft Martini-Henry designed to use PPS gas shotgun shells. The rifle is designed to replicate the Mk.II carbine version of this rifle, however, comes with alternate layouts of furniture to allow for you to customize to fit your want for this rifle/shotgun. the internals have been designed to guarantee as much strength in the system as possible and to minimize non-printed parts. an entirely unique design that would be the focal point of any airsoft field it's used on.

Firing video will soon be uploaded to reddit

Features:
-Easy construction
-very few post-printing processes required
-Fully replicates the workings of the Martini-Henry rifle
-comes with Picatinny rails/attachment points if wanted

Information:

The PPS Gas shells are integral to the operation of this firearm

Files contain: Martini-henry, Furniture for Mk.II Carbine, Hunting variant, sawn-off variant and bayonet .

The barrel for this shotgun/rifle is designed to use a 22mm copper pipe to increase strength and provide a reliable base to attach furniture, also to take advantage of the heavier weight. however, a printable barrel is offered but is advised against.

parts needed for each are

Only one receiver needs to be printed as it can be changed at any point to any of the variations.

For Martini-henry MK.II Carbine
-8 M5*16 screws
-2 M3*8 screws
-6 M3*20 screws cut down to suitable sizes (or any M3 screw you feel is adequate for each requirement)
-1 pen spring cut down to 15mm
-all receiver stls
-540mm barrel
-all furniture stls but barrel band 2 and sawn-off grip

For hunting rifle variant
-8 M5*16 screws
-2 M3* 8 screws
-5 M3*20 screws cut down to suitable sizes (or any M3 screw you feel is adequate for each requirement)
-all receiver stls
-540mm barrel
-all stls apart from use barrel band 2 instead of 1 ,print no further handguards but 1 and no sawn-off grip

For Sawn-off variant
-8 M5*16 screws
-2 M3* 8 screws
-3 M3*20 screws cut down to suitable sizes (or any M3 screw you feel is adequate for each requirement)
-all receiver stls
-200mm barrel
-Sawn-off grip, Sights, Handguard 1, and Barrel Band 2

For Bayonet
-2 M3*16 screws
-for use on the airsoft field a TPU printed blade
-All Bayonet parts

A strong plastic to metal/plastic to plastic glue is also required for the stock and sights.

For any questions or problems feel free to message and I will attempt to respond ASAP, Custom parts or requests can also be requested.

disclaimer
These files are not for distribution and for personal use only, If you have intentions to distribute please contact me for discussion.
This is for AIRSOFT only, no part of this is for real firearms or can be used as such.

Printed on an ender 3 pro so all parts fit on a standard fdm printer base.

All receiver parts are best printed at 90-100% infill, apart from the receiver itself which is down to users choice

The large pieces of furniture, i.e Stock and handguards can be printed on low infill to save on filament and weight however sling swivels and barrel bands will need high infill for strength.

The material used was cheap PLA, so should be usable with all stronger filaments. Wood PLA would work very well for furniture parts but isn't necessary.