GPU/Riser Double Support

Robust support for mounting 1 or 2 Graphic cards outside the cabinet for mining, exhibition, ventilation, or space purposes.

 Both Graphic card and Risers are supported on a flat surface, allowing the use of screws for a more complete fixation (list of screws below). This avoids the long-term consequences of 24/7 vibrations: heating of the contact region and even fire. 

 You can mount this support with up to 3 fans (120mm)! Save your graphic card fans, the lower the temperature, the longer your equipment lasts.

 Keep everything organized! If you have more than two graphic cards, you can still connect one support to the other by the side docking system, joining them completely using a screw.

 The bottom has space to stick silicone or rubber feet.

 Designed to be printed in either PLA or ABS. ABS is recommended depending on the operation temperature.

 No support required.

Assembling tutorial:
https://www.youtube.com/watch?v=oftSA5VmKog&ab_channel=3DTROOP

List of screws:
-> Fixing the graphic card: 2x M3.5-12mm
-> Fixing the riser support to the main support: 1x M4x12mm
-> Union between two supports: 1x M4x12mm
-> Fixing the Risers on the support: 8x M3x16mm
Reference for silicone feet: 3M Scotch Bumpers 8mm x 8mm x 2.5mm

Please feel free to share the images of your print in your setup, that would be great!

This is a personal use license, if you want to sell the printed parts from this design in your region, please get in contact.

 Don't forget to hit like and follow us! Every week we will be posting new models for you!

Check out other of 3DTROOP models:

AUTOMATIC CAN HOLDER: https://cults3d.com/en/3d-model/gadget/automatic-can-holder

AUTOMATIC CAN HOLDER 470ML: https://cults3d.com/en/3d-model/gadget/automatic-can-holder-470ml

LITTLE SHARK: https://cults3d.com/en/3d-model/art/little-shark

KID JACK: https://cults3d.com/en/3d-model/art/kid-jack

BIG EYED DRAGON: https://cults3d.com/en/3d-model/game/big-eyed-dragon

ARTICULATED DRAGON: https://cults3d.com/en/3d-model/art/articulated-dragon-3dtroop

CHAMELEON FLEX: https://cults3d.com/en/3d-model/game/chameleon-flex

HAND FLEX: https://cults3d.com/en/3d-model/game/hand-flex

DINO TOOTHPASTE CAP: https://cults3d.com/en/3d-model/game/dino-toothpaste-cap

GPU DOUBLE EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-double-external-support

GPU SINGLE EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-single-external-support

GPU EXTERNAL SUPPORT: https://cults3d.com/en/3d-model/gadget/gpu-external-support

LETTER ROBOT A: https://cults3d.com/en/3d-model/game/letter-robot-a

LETTER ROBOT E: https://cults3d.com/en/3d-model/game/letter-robot-e

3DTROOP BOT 01 - PRINT IN PLACE: https://cults3d.com/en/3d-model/game/3dtroop-bot-01-print-in-place

PHOTO BACKGROUND STAND: https://cults3d.com/en/3d-model/gadget/photo-background-stand

Dimensions(mm):209,9 x 180,0 x 134mm
Layer heigh: 0,2mm
Walls: 2
Infill: 15%
Material: PLA or ABS
No support required.
Base speed: 50mm/s
Printing time: ~10h 27min