Skip to content

Stack Master Pro

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (4 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 15.8k views
  • 71 likes
  • 147 downloads
  • 1 collection
  • 4 comments
License
3D design format
STL and ZIP Folder details Close
  • 25mm Drawer 1-3.stl
  • 25mm Drawer Top.stl
  • 4 box Assembly v6.stl
  • 56.8mm Drawer Bottom.stl
  • 56.8mm Drawer Top.stl
  • Box 2 slots 56.8mm.stl
  • Box 4 slots 25mm.stl
  • Divider A-25 L=20mm.stl
  • Divider B-25 L=40mm.stl
  • Divider B-25-slots L=40mm.stl
  • Divider C-25 L=60mm.stl
  • Divider C-25-slots L=60mm.stl
  • Divider D-25 L=80mm.stl
  • Divider D-25-slots L=80mm.stl
  • Divider E-25 L=100mm.stl
  • Divider E-25-slots L=100mm.stl
  • Divider X-25 L=120mm No slots.stl
  • Divider X-25-Slots L=120mm.stl
  • Flat drawer knob.stl
  • Large stacking box with Rail.stl
  • Pin to connect boxes to each other.stl
  • Small Stacking box with rail.stl
  • Smiley Drawer knob.stl
  • Stack master ProALL STL R2.zip
    • Stack Master Pro info.pdf
    • Box/CCR10_Box 2 slots 56.8mm.stl
    • Box/CCR10_Box 4 slots 25mm.stl
    • Box mounting pins/CCR10_Pin to connect boxes to each other.stl
    • Box mounting pins/Wall mount Pin for Boxes.stl
    • Dividers/25mm/Divider A-25 L=20mm.stl
    • Dividers/25mm/Divider B-25 L=40mm.stl
    • Dividers/25mm/Divider B-25-slots L=40mm.stl
    • Dividers/25mm/Divider C-25 L=60mm.stl
    • Dividers/25mm/Divider C-25-slots L=60mm.stl
    • Dividers/25mm/Divider D-25 L=80mm.stl
    • Dividers/25mm/Divider D-25-slots L=80mm.stl
    • Dividers/25mm/Divider E-25 L=100mm.stl
    • Dividers/25mm/Divider E-25-slots L=100mm.stl
    • Dividers/25mm/Divider X-25 L=120mm No slots.stl
    • Dividers/25mm/Divider X-25-Slots L=120mm.stl
    • Dividers/56.8mm/Divider A-56.8mm L=20mm.stl
    • Dividers/56.8mm/Divider B-56.8mm L=40mm.stl
    • Dividers/56.8mm/Divider B-56.8mm-slots L=40mm.stl
    • Dividers/56.8mm/Divider C-56.8mm L=60mm.stl
    • Dividers/56.8mm/Divider C-56.8mm-slots L=60mm.stl
    • Dividers/56.8mm/Divider D-56.8mm L=80mm.stl
    • Dividers/56.8mm/Divider D-56.8mm-slots L=80mm.stl
    • Dividers/56.8mm/Divider E-56.8mm L=100mm.stl
    • Dividers/56.8mm/Divider E-56.8mm-slots L=100mm.stl
    • Dividers/56.8mm/Divider X-56.8mm L=120mm No slots.stl
    • Dividers/56.8mm/Divider X-56.8mm-Slots L=120mm.stl
    • Drawers/25mm Drawer 1-3.stl
    • Drawers/25mm Drawer Top.stl
    • Drawers/56.8mm Drawer Bottom.stl
    • Drawers/56.8mm Drawer Top.stl
    • Drawers/Flat drawer knob.stl
    • Drawers/Smiley Drawer knob.stl
    • Plugs to fill empty spaces/Front Plug for 25mm box.stl
    • Plugs to fill empty spaces/Front Plug for 56.8mm box.stl
    • Plugs to fill empty spaces/Side Plug for 25mm box.stl
    • Plugs to fill empty spaces/Side Plug for 56.8mm box.stl
    • Requests/280mm box and drawers/25mm Drawer 1-3 v2 280mm deep.stl
    • Requests/280mm box and drawers/25mm Drawer Top v2 280mm deep.stl
    • Requests/280mm box and drawers/56.8mm Drawer Bottom v2 280mm deep.stl
    • Requests/280mm box and drawers/56.8mm Drawer Top v2 280mm deep.stl
    • Requests/280mm box and drawers/Box 2 slots 56.8mm v2 280mm deep.stl
    • Requests/280mm box and drawers/Box 4 slots 25mm v2 280mm deep.stl
    • Requests/drawers with knobs/25mm Drawer 1-3 v2 with knobs.stl
    • Requests/drawers with knobs/25mm Drawer Top v2 with knobs.stl
    • Requests/drawers with knobs/56.8mm Drawer Bottom v2 with knobs.stl
    • Requests/drawers with knobs/56.8mm Drawer Top v2 with knobs.stl
    • Top mounted boxes/Large stacking box with Rail.stl
    • Top mounted boxes/Large stacking box.stl
    • Top mounted boxes/Small Stacking box with rail.stl
    • Top mounted boxes/Small Stacking box.stl
    • Top mounted boxes/Stack Pin for Large box.stl
    • Top mounted boxes/Stack Pin for Small box.stl
    • Profile for Stack Master Pro.curaprofile
  • Wall mount Pin for Boxes.stl

Learn more about the formats
Last update 2022-01-17 at 05:39
Publication date 2021-09-07 at 04:22
Design number 513096
D3P_Printing

D3P_Printing

3D printer file info

3D model description

*** UPDATE 2023-03-15 ****
I added some new pictures and will soon add a new video link.
Go check out our patreon https://www.patreon.com/d3design/membership if you would like to be able to sell the 3D print commercially.

*** UPDATE 2022-01-16***
I added a few requested mods, they are in the "requests" folder in the zip file. I will add more in the future.

I needed storage to clean up the mess that is my workspace. I looked at what was available and saw they were either too small, too flimsy or limited in the sense I would have to print so many different bins. I needed something practical and strong at the same time.

Initially I only wanted to make some drawers in a box, but then I was like "hey why don't I make it modular.... and while I'm at it why don't I make it mountable to walls, oh and add some more stackable containers on top.." Well you get the idea. It just grew and grew and so the Stack Master Pro was born.
- https://youtu.be/3RZPaRHzjRE

Update Section

- added drawer knobs that slide in, one with smiley face and one flat, use the smiley face, it will brighten your day :)

A totally Modular storage system. Here are some features:
-Small drawers : 120mmx120mm x 25mm deep drawer
- Larger Drawer 120mmx120mmx56.80mm deep drawer
- There are different drawer sizes, one for small pieces and one for larger pieces.
- 100% support free prints.
- You can mount the boxes to each other using the rails or mount them to a wall and easily slide them off, put them on your desk and once you are done put them back on the wall.
- There are 2 sizes of bins that slide into the top or sides if you really want to :) (don't do that)
- Top mounted Large bin :114mmx177mmx65mm deep
- Top mounted small bin : 60mmx177mmx65mm deep
- There are holes on the front of the drawers so you can add your own handle or even a logo.
- Room for tags to show what is inside each drawer.
- Stackable bins for the tops.
- Heavy duty design (could be used in self defense if required)
- Modular drawers, yes that's right, divide the drawers into 2,3,4,5 up to 36 sections per drawer if your feeling adventurous.
- Pins to cover slots that are not used so those tiny parts do not get stuck.

Here are some features I will add in the future.
- Pegboard mounting system.
- Designed handles for the drawers. *** DONE ***
- Customizable name plates that slide into the front of the drawers.
- Different size boxes and bins which will all work with the same style slots so it is modular.
- Modular mounts for side to hold tools like screw driver stand set or plyer holders. They will use the rail system so they can easily attach to the boxes.
- Spool holders.
- Suggestions are more than welcome.

Tips to navigate all the files.
- All the files you will need are in the zip file, the rest are copies so you can ignore them. They are only there so the files can be previewed.
- The STl where everything is assembled is for display only.
-There are 2 boxes, one with 4 drawers and one with 2 drawers.
- There are special drawers for the top of each box, you could technically just print the bottom drawers file but there will be a small gap on the face.
- There are 2 sets of bins that mount on the top, one set uses rails so they attach to the boxes and the other uses pins so they stack on top of each other. Note about the pins, I had some severe elephants foot on mine so I had to scale it down a little bit to make it fit, if it fits too loosely for you either scale it up a up or let me know and I can add some more variants.
- The dividers are fairly self explanatory , there are different sizes and each size has a slots and NO slots version.
- All the files are neatly in folders with clear names, if you struggle to figure out what to print let me know and I will provide some guidance / update this section.

Feel free to ask me for a custom sized bin or drawer. If I have time I will make it and add it.

Included is a PDF with the sizes of all the models. The PDF will also show you the print settings I used to print.
There is also a Cura Profile file you can import to Cura to see what settings I used.
I used a Creality CR10 V3 to do the prints.

3D printing settings

  • Slicer used : Cura
  • Layer height 0.32mm
  • Line Width 0.4mm (0.4mm nozzle)
  • Wall line count 2
  • Top / Bottom layers 4
  • Infill 15%
  • infill pattern Cubic
  • material used Econofil PLA
  • Print at 200 Degrees Celsius with 60 bed temp
  • Print speed 50mm/s
  • Supports : NO
  • Adhesion : Skirt
  • https://youtu.be/3RZPaRHzjRE

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.