6200RS Bearing Bracket - Pillow Block 3D print model

Bearing Bracket to suit standard 6002RS Bearing - 30mm outer x 9mm x 10mm inner. Also known as a pillow block. The Bearings can be knocked in gently to the Model immediately after printing - whilst still warm and with standard shrinkage the bracket will hold only the bearing perfectly. There are two sets of Securing holes in case needing to offset these at the same height on diagonally opposing faces of aluminium extrusion - so two different height holes can be drilled without intersecting. Example images of completed unit - printed in PLA, 190C. 0.2mm precision, 25% infill.