Improved recycled spools dresser, double, containers & drawer with spacers

This is a remix of Recycled spools dresser. I like so much this idea, but I need to improve it. After first printing I need separator or boxes where i can put small screws or dices, whitout making them mixing. So I've drawer the follow solution to improve intelligent space in every drawer.I've created 3 different solution to improve this idea:

1- Standard dresser (file called "Standard")
for this I've create 3 different boxes: Standard 1-2, Standard 1-4 and Standard 1-8 (it indicate box dimension: half of dresser, quarter of dresser and eighth of dresser)

2- Half Standard dresser (file called "Half Standard")
this dresser change height of dresser (is half of Standard dresser) for this I've create 3 different boxes: Half Standard 1-2, Half Standard 1-4 and Half Standard 1-8 (it indicate box dimension: half of dresser, quarter of dresser and eighth of dresser)

3- Separator Drawer and Drawer Separator: different concept, same thing: a standard dresser with hole for separator: you can put or remove it every time you need, to expand or reduce a section.

This design is from DANILO COVA from Como (Italy), one of the great Makers of our Community. He found the way not to trow away his used spools from FILOALFA - 3D filaments Italian producer - and re use them as desk organizer to store screws, bolts, small parts.
This simple and creative idea is so good that we decided to share it with you. Maybe you don't use this producer's filaments, but you can easily modify the design to fit the kind of spool you usually buy. Use some self-tapping screw to mount the drawers inside the spool.

IMPORTANT: you don't need to make holes in the spools, simply use the pre-existing holes near to the edge to insert the screws.
All the best!

-