Enterprise - 1701 - A illuminable 3D print model

Something from my yard. The Enterprise 1701 A with the dimensions of l 77 cm, w 30 cm and h of 20 cm. The model can be illuminated and is fully equipped with cable ducts. The bridge area is detachable and a 12v block battery can be stored underneath in a warehouse. All side windows in the cup section are open and can therefore also be illuminated from the inside. If you want to set even more lights, you have to drill the openings yourself. The cups and and gondola sections can still hold each other despite the small adhesive surface. The parts are configured in such a way that they each fit on a printing area of 20 x 20 cm. The model can only be printed out from the size specified above. Those who try a smaller size will have trouble with the saucer section. There the shell is then too thin or not at all. So please only print from the size given above. I used the gondola the wrong way round in the photos of the model. That can of course also be used correctly. Friendly greetings to everyone