Cosplay Spells 3D print model

Cosplay Spells

This is a set of special effects that you can print and then light up with an LED to accompany your cosplay. We made fire, lightning and ice but if you change the color of the filament you could make them represent a different element. Here you have instructions on how to put it together and light up: https://www.instructables.com/id/Cosplay-Spells-Firebolt-Icebolt-Lightning

And a video here: https://youtu.be/1bJKiUQ5mgE

SCALE At 100% scale the spells are about 14 cm tall. The spells hold on a double ring and there are several ring sizes to choose from.

RECOMMENDED PRINT SETTINGS

1. infill 0%
2. layer height 0,35 mm (makes it more transparent)
3. just 1 perimeter
4. extrusion width 0,5 or more (it might be a good idea to switch your nozzle for a bigger size like 0,6 mm if you have one) Printing settings will vary greatly depending on your specific printer.

If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. Here are some links to our website and social media where you can see more of our creations:

https://3d-mon.com/links/