Thumb Book Holder - Collection 3D print model

Do you like reading? Do you want to drink your tea or coffee or, why not, eating some snack while holding your favorite book in your hand? This small holder can help you doing it easily! You'll only need to use your thumb to keep the book open! It's ergonomic and comfortable, it fits almost all the thumbs dimension, but feel free to scale it up or down if you need.

You can find 6 holders in this collection, each one is different according the genres of book you're reading (Action & Adventure, Crime & Mistery, Fantasy, Horror, Fantasy, Romance, Sci-Fi) + 1 generic (remembering you to keep reading both during days and nights).

Enjoy the read!

Edit: Thanks to a report from a customers, I figured out that I made a spelling error on the Generic model, where I wrote _Reeding _instead of the correct _Reading _[which is also noticeable on the pictures posted - that's actually embarassing not having figured it out before when I posted it...]

I've re-uploaded the whole collection with the correct spelling.

3D PRINTING SETTINGS:

• 3D Printer: Geeetech A10
• Nozzle: 0.4 mm
• Slicer: Cura 4.10.0
• Layer height: 0.2 mm (0.8 mm wall thickness; 4 top/bottom layers)
• Print time: around 1h
• Infill : 15%
• No support needed
• Printing Temperature: 198°C / Build Plate Temperature: 60°C
• Print speed: 60 mm/sec / Outer Wall Speed: 30 mm
• Filament: Wood PLA by Enotepad / Brown PLA
• Size: 10 x 3,4 x 1 cm (X,Y,Z)
• Weight: 9g