Addons and Leg Filler for Transformers Ectotron 3D print model

Since the last proton pack and accessories done up previously (https://www.patreon.com/posts/38159225), had a friend pass us an Ectotron to work on and do up some other accessories and filler pieces. So here they are!

This set is comprised of a pair of thigh and knee fillers, PKE meter, and ghost trap (open and closed versions) with foot pedal.

The filler pieces were designed to cover up the hollows which are present in the thighs and knee of Ectotron, and plug into place.

It is simple enough to print the knee pieces in black to match the existing part, but the thigh parts would be a little more challenging to color match filament for, and so are simply printed in white and painted over here.

The foot pedal and ghost trap are connected using a rubber tubing of 5mm outer diameter and 3mm inner diameter if you would like to source for it too.

===

So yeah, for all you lucky folks who do have this cool piece - have fun 3d printing some of these pieces out to enhance Ectotron then! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog