Adjustable PC Headset & Controller Stand

Headset and controller stand that adjusts to any width PC. Many out there didn't have the height my headset required so I started to design one and out came an adjustable piece for any case.

Details:

• Will adjust to fit a 6" to 9 3/4" wide PC case. Feel free to message me if you need this to go wider.

• Designed for use with an Xbox controller, not sure if PS4 or PS5 controllers will work, but that dimension between the two claws is 2 1/4"

• Three slots to let through light

• Top strap piece is holed out so that it doesn't hinder PC ventilation to much if yours is vented as such

• Three options provided for the headset ledge: f**k off txt, no txt, and triple slotted

• Designed for use with AW510H headset, which is a decent size, so your chunky headset will fit. The width of the headset ledge is 3 1/4", so thick strapped headsets will fit.

• Use super glue or your preferred epoxy for assembly. No sanding should be required.

• 8 total STL files, 6 total pieces for assembly (3 opt for headset ledge)

See pictures!

• Yes, the headset ledge will print in an odd orientation, I had no luck in other ways.

• Make sure the screw is printed at 100% infill for long term strength

• Anything threaded the thinner layer the better, but will be fine at .16