Genshin Impact - Ayato Vision

This model is designed for Kamisato Ayato cosplay from Genshin Impact. It is separated into 3 main parts. For the parts and their file names, you can refer to the picture I attached in the preview section.

To complete the prop, you can attach a tassel at the end of the prop. You can refer to the picture I attached in the preview to assemble them.

Suggested step to connect all the parts together:-
1. Attach part 1 to 2a using superglue or double sided tape.
2. Sandwich fishing line between 2a and 2b and glue them back to back. Make sure the excess fishing line is long enough for 3a and 3b.
3. Sandwich 3a and 3b to the fishing line come through 2a and 2b.
4. Get a similar tassel that can be attach to the bottom of part 3 using hot glue.

The above suggested steps are just for reference purpose, you can use whatever method that is suitable for you.

All the pieces come with flat surface that can lay easily on the printing bed. Since there is no hanging parts, therefore no support is needed in this print. However, I will suggest to use brim to avoid warping during the printing process.

For scaling, it can be done easily using slicer software of your choice. Please scale with the same factor across the parts to retain the same proportion. I did slightly thicken part 2a and 2b just in case you want to print the front part for your cosplay.

You can make it thinner by scaling it down on the Z axis if you think it is too thick when combine together. If you need help in scaling, don't hesitate to drop me a message to my Twitter.

Cheers and Happy printing!