Marilyn and Sharon by Moonlight - by SPARX

Originally a sculpt of my wife’s last photo shoot that I wanted to create an Art-Deco style lamp with . . then decided to create a lithograph moon as the lamp and add an IR Led controller . . It was inevitable as she was wearing a Monroe style dress that I thought someone may want to build this model also, so sculpted a Marilyn torso to fit.
There are a lot of moon lights out there large, small, impossible to print etc. . . so in designing the lithograph my first curved one, found even in vase mode it was difficult to print . . if I thickened the walls . .the light and my moon map was not very prominent when lit . . so a moon in two halves and thin enough for the lowest brightness LED to light it . . the plus side is printing the two halves is 45% less time than the vase mode one piece . . enjoy

Ss I printed the lamp column on SLA printer I made a 5 section column as well as the 3 section column . . again speed of print the reason.

The model is H272, and the moon lamp with base 358mm height.

2 torso’s options
1 Skirt
2 legs
3 Piece Column (in zip format)
5 Piece Column (in zip format)
Moon one piece
Moon A and Moon B two piece Litho
1 Base

11 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .

TIPS:
Resin Printing;
Hollow 2.40 Raft 100%

Do not Hollow Raft 100%
Column sections

FDM
ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.
You can assemble the full model prior painting and fitting to base.
Assemble the lamp column, thread wires through base and glue . . last fit moon globe over your LED’s . glue moon if you wish.
Model will fit to lamp base without glue if desired.