Articulated Long-Tailed Lizard - 114 cm (44in) Super long print-in-place

Commercial use not allowed except for my Patreon members. See below

Designed with the kids in mind, easy to play with, no fragile, small, spiky details like my dragon robot.

A nice, extra-long and funny, articulated long-tailed lizard.
An impressive 1.14 meter long (44in) that actually fits on a regular ender 3 bed!! Very flexible. Tail is composed of 101 parts!

Easy to print, not prone to stringing at all and a very good bed contact surface.

The purple one on the pictures is printed at 120%. The others, 100%.

You will need a well calibrated printer especially for the last parts of the tail, but everything worked fine for me with my three prototypes/test samples i made.

Use simple color changes to give a nice color pattern to them! Grass lizards doesnt really have a noticeable skin texture, which is way too small and tiny for that kind of print, so playing with colors was my choice for this model.

USE 0.35 EXTRUSION WIDTH for optimal results.
Works great also with 0.40 extrusion width
DOESNT WORK with 0.45 extrusion width at all. Don't try, tail will stick together.

Test file for the tail included.

The tail may need a little help. Try to break free the small parts by moving them slowly from side to side. Should do the work. If your settings are perfect, it will move without applying any force.

STRAIGHT VERSION also included for infinite printers. With a cr30, you can go over 10 FEET LONG!

The low profile of the lizard keeps the print time relatively low.

If you have any issues, you can send me a message at any time. I will answer you as quick as possible.

PATREON (For commercial license and access to all my models):
https://www.patreon.com/PA1_MAKER

Facebook:
https://www.facebook.com/PA1MAKER

-Layer height on pictures: 0.20mm
-Work best with 0.35 extrusion width
-Slow first layer
-Well calibrated printer, adjust flow if necessary to prevent any over extrusion.