Skip to content

SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS

bob_completo.gif SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
desamarda.jpg SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
cara_firma.gif SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
0_19.jpg SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
flujo.jpg SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
salida.jpg SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
untitled.25.jpg SPONGEBOB (SPONGE-HOLDER) COLOR-CODED PIECE FOR BETTER DETAILS
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.7k views
  • 12 likes
  • 17 downloads
License
3D design format
ZIP Folder details Close
  • Bob-esponja (porta esponja).zip
    • Extremidades/inferiores/Piernas/calzetin_derecho/1.-seccion_negra.stl
    • Extremidades/inferiores/Piernas/calzetin_derecho/2.-seccion_blanca(entre_negra_y_azul).stl
    • Extremidades/inferiores/Piernas/calzetin_derecho/3.-seccion_azul.stl
    • Extremidades/inferiores/Piernas/calzetin_derecho/4.- seccion_blacnca(entre roja y azul.stl
    • Extremidades/inferiores/Piernas/calzetin_derecho/5.-Seccion_roja.stl
    • Extremidades/inferiores/Piernas/calzetin_derecho/6.-SECCION BLANCA(union con zapato).stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/1.-seccion_negra.stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/2.-seccion_blanca(entre_negra_y_azul).stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/3.-seccion_azul.stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/4.- seccion_blacnca(entre roja y azul.stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/5.-Seccion_roja.stl
    • Extremidades/inferiores/Piernas/calzetin_izquierdo/6.-SECCION BLANCA(union con zapato).stl
    • Extremidades/inferiores/Piernas/Pierna_DERECHA.stl
    • Extremidades/inferiores/Piernas/Pierna_IZQUIERDA.stl
    • Extremidades/inferiores/Zapatos/Zapato_DERECHO.stl
    • Extremidades/inferiores/Zapatos/Zapato_IZQUIERDO.stl
    • Extremidades/superiores/Brazos/Brazo_DERECHO.stl
    • Extremidades/superiores/Brazos/Brazo_IZQUIERDO.stl
    • Extremidades/superiores/Hombros/Hombro_DERECHO.stl
    • Extremidades/superiores/Hombros/Hombro_IZQUIERDO.stl
    • Rostro/Boca/Boca.stl
    • Rostro/Boca/Diente_Derecho.stl
    • Rostro/Boca/Diente_Izquierdo.stl
    • Rostro/Globos oculares/globos_oculares.stl
    • Rostro/Globos oculares/Iris_derecho.stl
    • Rostro/Globos oculares/Iris_izquierdo.stl
    • Rostro/Globos oculares/pupila_derecha.stl
    • Rostro/Globos oculares/pupila_izquierda.stl
    • Rostro/mejilla/Mejilla_derecha.stl
    • Rostro/mejilla/Mejilla_izquierda.stl
    • Rostro/Nariz/nariz.stl
    • Rostro/pestaas/Pestaa_derecha.stl
    • Rostro/pestaas/Pestaa_izquierda.stl
    • TORSO/Cinturon/Cinturon.stl
    • TORSO/CORBATA/Corbata.stl
    • TORSO/Menton/Menton.stl
    • TORSO/Torso.stl

Learn more about the formats
Publication date 2022-02-26 at 16:51
Design number 650134
HF_design

HF_design

3D printer file info

3D model description

It is a sponge Bob for kitchen items that functions as a sponge holder. it can also be used as a school item to be a pencil holder and other school supplies.

EACH PIECE OF THE DESIGN IS SEPARATED BY DESIGN COLORS, for a better quality printing of the final product.

the face is cut in such a way that no two joints are the same to avoid confusion during assembly.

the torso comes with separations of:

-the tie.

-the belt (set covering all four sides).

-the chin (which gives it a touch of hyper realism).

in addition to having a three-point drainage system that drains water into the model's legs to direct it into the sink. the circular hole in the drainage system can be used to attach a magnet for better grip,

also the torso has a hole in the back to place a suction cup to attach it to the wall.

the arms are sectioned at the sleeves to separate the color from the print, as are the legs, which are sectioned at the socks to be placed by color section

IMPORTANT: THE .RAR DOES NOT HAVE A PASSWORD

3D printing settings

the dimensions of the model are based on the standard size of a kitchen sponge (11cm high, 7cm wide and 2.5cm thick) so for the illusion of a complete spongebob figure the dimensions of the final product are 17cm high (from the shoes to the head, 16cm wide (with arms extended) and 12cm thick (from the back to the tip of the shoe).

PRINT COLOR:

A) TORSO

Can be printed with filament switching technique during color printing:

brown for trouser

white for the shirt

yellow for the rest of the print.

red for the tie

black for the belt and chin

B) ARMS

in the following filament colors:

yellow for the arms.

white for the sleeves.

C) LEGS

the most complex part of the legs are the stockings that come printed as rings to be placed in the numerical sequence of each file

1.-black

2.-white.

3.-blue

4.-white

5-red

6.-white (the junction with the shoe)

each stl file has in its name the binding sequence

D) SHOES

Black color

E) FACE

in black the mouth, pupil and eyelashes.

in white the eyeball and teeth.

in blue the iris

IMPORTANT:

TO GLUE THE JOINTS DO NOT USE WATER SOLUBLE GLUES, WE RECOMMEND THE USE OF PVC GLUES OR THE DROPLET.

PRINT PARAMETERS

material: PLA

nozzle temperature: 200 degrees

bed temperature: 60 degrees

filling:15%

contour:2

layer height:0,2

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.