Skip to content

AM8 Anet A8 Electronics Housing

1.png AM8 Anet A8 Electronics Housing
3.png AM8 Anet A8 Electronics Housing
2.png AM8 Anet A8 Electronics Housing
7bb7068a927b4d1e43ea3f915a0de511.png AM8 Anet A8 Electronics Housing
3385dbbd7ea28411a5990eb04248f0cf.png AM8 Anet A8 Electronics Housing
642d3b1553ec826084a5dacb6270f5a5.png AM8 Anet A8 Electronics Housing
a96dfe7419fa51955fbaca23821a0eff.png AM8 Anet A8 Electronics Housing
Main_Board.stl AM8 Anet A8 Electronics Housing
Main_Board_Cover.stl AM8 Anet A8 Electronics Housing
Mosfet_Board.stl AM8 Anet A8 Electronics Housing
Mosfet_Board_Cover.stl AM8 Anet A8 Electronics Housing
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.9k views
  • 5 likes
  • 31 downloads
License
3D design format
STL Folder details Close
  • Main_Board.stl
  • Main_Board_Cover.stl
  • Mosfet_Board.stl
  • Mosfet_Board_Cover.stl

Learn more about the formats
Publication date 2022-02-25 at 05:22
?
Published to Thingiverse on: 2017-06-27 at 03:34
Design number 648913
michael6

michael6

3D printer file info

3D model description

This is my Electronics housing for the AM8 conversion for the Anet A8. this is designed to fit a slim 120mm 12v. the housing is modular so they can be placed however you would like them. to access the boards after everything is assembled all you need to do it loosen the bolts holding the covers and slide them up and down. this does require removing the top cross bar to install.

the front and back are only 3mm thick. i made them thinner so there was a better clearance for the fan.

the housing is attached to the frame using the same method ad the frame is assembled.

use M3 6mm self tapping to attach the boards to the housings.

i did not place any any sides so that people could route cables however they wished. ( a problem with my previous case)
i did add wire tie-down spots on either side of the board mounts to clean up wires tho.
there is also a cutout on both the cover and back plate of the mosfet housing for the x endstop and x motor wires.

as the stock 10Pin LCD cable is a tad short i provided a link to a longer one on ebay.
the stock will work if you place the mainboard at the bottom end and the mosfets above.

Components:
- Mosfet
- Scythe Slip Stream Slim SY1212SL12H 120mm Case Fan
- m3 tapping hex
- 10Pin 60cm LCD Ribbon Cable
- eBay

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.