Mop and Wet Floor Sign for Transformers Constructions

This zany set came out from the wacky idea that using the elevator in the Decepticons' underwater would tend to be a leaky proposition. Especially when it has to extend vertically upwards to get to the surface of the water and then back down again.

Yeah, leaks are bound to happen .... and when they do, someone's gonna have to mop it up ...

Here's a closer look at the sign itself, because the last time the puddle was left there, there was a slight accident which Megatron got into....

So, gotta be diligent about keeping the floors dry ... and let's not wonder too much about why we didn't build our headquarters on dry land instead. :P

=== Assembly ===
Here are the various parts of this little kit:

• The Signboard itself is comprised of two parts which are to be connected up using a short segment of 1.75mm filament.
• The sign itself comes in a variant with the text on it, or a blank one which you can choose to use and fill with your own custom text or pictures!
• The mop itself comes in two parts - the mophead and the handle itself (which can be resized to different lengths in your slicer before printing)

===

As always, have fun printing and equipping your bots up with this fun little set! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog