Skip to content

F-14 RC Aircraft (Twin 50mm Fan, 960mm span)

P1430988.jpg F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
P1430916.jpg F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
P1430735.jpg F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
P1430750.jpg F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
F-14-Flying-1.png F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
F-14-3-Copy.png F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
F-14-5.png F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
F-14-6.png F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
Print-Settings.png F-14 RC Aircraft (Twin 50mm Fan, 960mm span)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 27.5k views
  • 119 likes
  • 205 downloads
  • 1 collection
  • 12 comments
License
3D design format
1 file (ZIP) Close
  • F-14 Twin 50mm EDF v1.5.zip
    • F-14 Build Guide.pdf
    • Tailerons/Ele Control Horn L.stl
    • Tailerons/Ele Control Horn R.stl
    • Tailerons/L Ele Inner.stl
    • Tailerons/L Ele Outer.stl
    • Tailerons/R Ele Inner.stl
    • Tailerons/R Ele Outer.stl
    • Tailerons/Taileron Bearing L.stl
    • Tailerons/Taileron Bearing R.stl
    • Tailerons/Taileron Cover L.stl
    • Tailerons/Taileron Cover R.stl
    • Fuselage/Battery Tray.stl
    • Fuselage/Canopy Back.stl
    • Fuselage/Canopy Front.stl
    • Fuselage/Engine Strake Cover L.stl
    • Fuselage/Engine Strake Cover R.stl
    • Fuselage/ESC cover.stl
    • Fuselage/Fan Cover L.stl
    • Fuselage/Fan Cover R.stl
    • Fuselage/Fin L.stl
    • Fuselage/Fin R.stl
    • Fuselage/Fuse 1.stl
    • Fuselage/Fuse 2.stl
    • Fuselage/Fuse 3.stl
    • Fuselage/Fuse 4.stl
    • Fuselage/Main Spar.stl
    • Fuselage/Spar Insert L.stl
    • Fuselage/Spar Insert R.stl
    • Fuselage/Tail Cap.stl
    • Fuselage/Tail Hook.stl
    • Fuselage/Wing Plate.stl
    • Fuselage/Wing Sweep Servo L.stl
    • Fuselage/Wing Sweep Servo R.stl
    • Alternate Parts/Reversed Wing sweep servo mounts/Wing Sweep Servo Reversed L.stl
    • Alternate Parts/Reversed Wing sweep servo mounts/Wing Sweep Servo Reversed R.stl
    • Alternate Parts/Smaller Printers/Fuse 1 Back.stl
    • Alternate Parts/Smaller Printers/Fuse 1 Front.stl
    • Alternate Parts/Smaller Printers/Fuse 2L.stl
    • Alternate Parts/Smaller Printers/Fuse 2R.stl
    • Alternate Parts/Smaller Printers/Fuse 3L.stl
    • Alternate Parts/Smaller Printers/Fuse 3R.stl
    • Alternate Parts/Smaller Printers/Wing plate L.stl
    • Alternate Parts/Smaller Printers/Wing plate R.stl
    • Alternate Parts/Split Canopy/Canopy Back Base.stl
    • Alternate Parts/Split Canopy/Canopy Back Top.stl
    • Alternate Parts/Split Canopy/Canopy Front Base.stl
    • Alternate Parts/Split Canopy/Canopy Front Top.stl
    • Alternate Parts/Wing 1 Ball joint mounts/Wing L1 Rod mount.stl
    • Alternate Parts/Wing 1 Ball joint mounts/Wing L1 Screw mount.stl
    • Alternate Parts/Wing 1 Ball joint mounts/Wing R1 Rod mount.stl
    • Alternate Parts/Wing 1 Ball joint mounts/Wing R1 Screw mount.stl
    • Wings/Aileron L1.stl
    • Wings/Aileron L2.stl
    • Wings/Aileron L3.stl
    • Wings/Aileron R1.stl
    • Wings/Aileron R2.stl
    • Wings/Aileron R3.stl
    • Wings/Lower Wing Bearing L.stl
    • Wings/Lower Wing Bearing R.stl
    • Wings/Upper Wing Bearing L.stl
    • Wings/Upper Wing Bearing R.stl
    • Wings/Wing L1 Rod mount.stl
    • Wings/Wing L1 Screw mount.stl
    • Wings/Wing L2.stl
    • Wings/Wing L3.stl
    • Wings/Wing L4.stl
    • Wings/Wing R1 Rod mount.stl
    • Wings/Wing R1 Screw mount.stl
    • Wings/Wing R2.stl
    • Wings/Wing R3.stl
    • Wings/Wing R4.stl
    • Images/LW Flying 1.JPG
    • Images/LW Flying 2.JPG
    • Images/LW Flying 3.JPG
    • Images/LW Flying 4.JPG
    • F-14.blend
    • Alternate Parts/Single bearing tailerons/Fuse 4 single taileron bearing.stl
    • Alternate Parts/Single bearing tailerons/Taileron Bearing single L.stl
    • Alternate Parts/Single bearing tailerons/Taileron Bearing single R.stl
    • Alternate Parts/Single bearing tailerons/Taileron Cover single L.stl
    • Alternate Parts/Single bearing tailerons/Taileron Cover single R.stl
    • Alternate Parts/Smaller Printers/Fuse 4 L Exhaust.stl
    • Alternate Parts/Smaller Printers/Fuse 4 R Exhaust.stl
    • Alternate Parts/Smaller Printers/Fuse 4 Shorter Bottom.stl
    • Alternate Parts/Smaller Printers/Fuse 4 Shorter Top.stl
    • F-14 example profile creality.curaprofile
    • F-14 example profile generic printer.curaprofile

Learn more about the formats
Last update 2023-01-03 at 10:18
Publication date 2022-03-05 at 11:56
Design number 656470
DJDesigns

DJDesigns

3D printer file info

3D model description

Update v1.5 - 28 November:
Added an example Cura profile
Made the tailerons use two bearing instead of one to increase rigidity

23 September:
Added .blend file to main release

Update v1.4 - 9 August:
Fixed Fuse 4 not slicing in Cura
Added more flight images

Update v1.3 - 18 April:
Increased servo wire room for better servo compatibility
Improved Wing 1 to reduce flex and improve swing linkage
Optional reversed servo mount for wing sweep

Update v1.2 - 26 March:
Minor update of the build guide to show the wing linkages better

Update v1.1 - 22 March:
Alternate Parts for smaller print bed - 210 x 210 x 240 mm
Other minor improvements

To get updates, simply redownload the files

RC aircraft of the F-14 Tomcat. Has all moving tail and swing wings and is powered by two 50mm fans
The build guide for this aircraft is included, but can be downloaded for free from: https://cults3d.com/en/3d-model/various/build-guide-f-14-rc-aircraft-twin-50mm-fan-960mm-span

General info
Wingspan unswept / swept: 96.7 cm / 56.3 cm
Length: 96.3 cm
Scale: Approximately 1/20
Flying weight (PLA parts and 4s 3300): 1.35 kg
Estimated flying weight (LW PLA and 3s 2200): 980g
Thrust 4s/3s: 1.6 kg/1.2kg
TWR: 1.2

Required Parts:
• 9g Servos x6
• Medium CA glue
• Receiver - Recommended 8 channel
• Battery – Recommended 4s 3300 - 3s 2200, depending on flight time and weight
• 50 mm fan x2 - Recommended FMS 50mm 4s for PLA / 3s for LW PLA version
• https://www.fmsmodel.com/product/fms-50mm-11-blade-4s-power-system-with-2627-
kv4500-motor/45/
• https://www.fmsmodel.com/product/fms-50mm-11-blade-3s-power-system-with-2627-
kv5400-motor/46/
• 2x10mm magnets x2
• ESC x2 – Recommended 40 amp
• 6x12x4 Ball Bearing - x8
• 2 x 10 Magnets
• Screws
• Tape for aileron hinges
• Velcro for Battery
• RC ball joints and threaded wire linkages for wing sweep
• 1mm Wire for Aileron/Taileron linkages
• Double sided tape for Fans
• 6mm carbon tube:
• 34cm x2
• 22mm x2
• 4 cm x2
• 6x1 carbon strip:
• 26.2cm x2
• 35cm x2

Flight videos:
Slope Maiden: https://youtu.be/NyUdkcUjiJQ
Powered Maiden Fail: https://youtu.be/8Ut3u22hB6I
Powered Maiden Success: https://youtu.be/WXUpW8V9eRE
Crash on landing: https://youtu.be/DsXqMpflicI
LW-PLA Maiden Flight: https://youtu.be/x7_edfA85Vk
Another LW Flight: https://youtu.be/GwzpSJa0v-M
Thanks to MrWaz11 for all flight photography

3D printing settings

Material: PLA or LW PLA
Minimum Print Volume: 210 x 210 x 240mm
Printed with 0.4mm nozzle
The build guide provides an image showing all print settings used

Categories

All designs › Various › Dioramas

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.