Pressure gauge holder Audi A4 B6 / B7

Hello friend, today I wanted to bring you something that could be useful, if you had an Audi A4 B6 or B7, Diesel or Gasoline does not matter, and maybe you would like to mount a pressure gauge for the turbo, or the instruments that you think are most essential.

The design was devised, using the air conveyor from the dashboard, to give a homogeneous line and without resorting to the classic modification that many do, to ruin the front air conveyor, cutting into a thousand pieces the original spare part, in addition to my project, allows you to also have the air intake.

In the package you are going to download, you will find 3 different models, one with the audi logo, the other smooth and another that has the thickness of the housing, slightly thicker.

The pressure gauges to use, are the classic 52mm, must be mounted without the iron support that give the equipment, in addition, the cables and the pipe must pass through the slot that I created, so as to get a nice work with hidden cables.

I also want to remind you, that all my designs are interlocking, and have a tolerance of 0.50mm "standard tolerance of all printers", if you like many others do not know what tolerance your printer has, I suggest you download my tolerance test, It’s on my profile.

As always I want to thank you for spending your time in viewing my project, and if you find it interesting, I suggest you take a look at my profile cults, because you will find a lot of interesting projects, And I’m sure you’ll find something for you, and I also remind you to leave me a like if you appreciate my work.

Good press friend

Layer 0.15 or 0.20
Infill 15%
Top and Bottom Layer 4
Perimeter Layer 3
Support Yes "View Pictures"
Speed 50/60 mm/s