With Tigatron working remotely from home, the laser relay station was his main communication channel to send in his weekly report to the Maximal base.

The entire station mounted on top of 2 standard Cyberbase base tile using the provided CBS Pegs in the fileset. It can be pushed forwards or backwards depending on which pair of pegholes being used.

The station features a radar dish mounted up high, controlled using the terminal situated at its base.

The terminal allows Tigatron to use it comfortably in his bot mode, typing in his report on the attached keyboard.

As a fun feature, a little slot has been designed into the portion beneath the keyboard, where you could insert a golden disc if you have one handy!

Being as large piece as it is, a little accessory cache has been designed into it. Leaving the terminal portions unglued from the main tower parts, it can be pulled forward revealing a small hollow for keeping small parts and accessories.

Up top, the tip of the radar has been designed such that effect parts can be fitted on, simulating transmissions of sorts!

And of course, this is best used in tandem with the repeater dish ( https://www.patreon.com/posts/63362885 ) to extend the range of communications for our Maximal pals!

=== Assembly ===
Here's the attached diagram to visually show the various parts of this build and how they assemble.

The various pegs used have been color coded for a clearer look at where they are located and how many are needed.

As usual, have fun 3d printing and putting this one together for your Transformers collection! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog