Skip to content

3D Sock Knitting Machine

XiaoYing_Video_1648503854004.gif 3D Sock Knitting Machine
Media_230328_065821.gif 3D Sock Knitting Machine
PXL_20220302_123437866.jpg 3D Sock Knitting Machine
PXL_20220217_123938064.jpg 3D Sock Knitting Machine
IMG-20220223-WA0014.jpg 3D Sock Knitting Machine
IMG-20220223-WA0011.jpg 3D Sock Knitting Machine
IMG-20220223-WA0010.jpg 3D Sock Knitting Machine
PXL_20220302_123639722.jpg 3D Sock Knitting Machine
PXL_20220403_174927080.jpg 3D Sock Knitting Machine
PXL_20220331_113856764~3.jpg 3D Sock Knitting Machine
PXL_20220319_143156959.jpg 3D Sock Knitting Machine
PXL_20220307_200344374.jpg 3D Sock Knitting Machine
Counter.png 3D Sock Knitting Machine
Main-Front-View.png 3D Sock Knitting Machine
Main-Rear-View.png 3D Sock Knitting Machine
Yarn-Carrier.png 3D Sock Knitting Machine
Yarn-Stand-and-Tensioner.png 3D Sock Knitting Machine
PXL_20230509_093014723.jpg 3D Sock Knitting Machine
Yarn Stand Vert Holder.stl 3D Sock Knitting Machine
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.0/5 (9 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 74.2k views
  • 454 likes
  • 136 downloads
  • 7 collections
  • 1 make
License
3D design format
PDF, STL, and ZIP Folder details Close
  • CSM.zip
    • Cam Shell/Cam Shell Gear (3mm Screws).stl
    • Cam Shell/CamMount Mirror.stl
    • Cam Shell/CamMount.stl
    • Cam Shell/CamShell v4.stl
    • Cams/LH Cam v1.5.stl
    • Cams/RH Cam v1.5.stl
    • Counter/Counter Mount.stl
    • Counter/Lug.stl
    • Counter/Screen Frame Rotate.stl
    • Counter/Screen Frame.stl
    • Counter/Sensor Mount.stl
    • Crank/Coupler2.stl
    • Crank/Crank Gear Flat.stl
    • Crank/Crank Handle M5x25.stl
    • Crank/Crank.stl
    • Crank/Drill Jig.stl
    • Cylinders/48 slot 1.4mm With Recess.stl
    • Cylinders/52 slot 1.4mm With Recess.stl
    • Cylinders/54 slot 1.4mm With Recess.stl
    • Cylinders/60 slot 1.4mm With Recess.stl
    • Cylinders/64 slot 1.4mm With Recess.stl
    • Cylinders/72 slot 1.4mm With Recess.stl
    • Cylinders/75mm Extension.stl
    • Cylinders/84 slot 1.3mm.stl
    • Frame/New Front Plate Fixed.stl
    • Frame/New LH Side.stl
    • Frame/New RH Side.stl
    • Frame/New Top PLate.stl
    • Frame/Yarn STand Base.stl
    • Special Requests/Cam shell spacer.stl
    • Special Requests/Cylinder Tool.stl
    • Special Requests/Extension Ring.stl
    • Special Requests/Needle Gauge.stl
    • Special Requests/New Top PLate Bars moved.stl
    • Special Requests/New Top PLate test.stl
    • Special Requests/Svitlana Top Plate.stl
    • Tension Cam/TensionCam v2.stl
    • Yarn Feed/AntiRotate LH.stl
    • Yarn Feed/AntiRotate RH.stl
    • Yarn Feed/Cam Carrier Fixing.stl
    • Yarn Feed/Yarn Carrier Top.stl
    • Yarn Feed/Yarn Carrier Vertical.stl
    • Yarn Feed/Yarn Carrier X Feed.stl
    • Yarn Feed/Yarn Carrier Z Adjuster.stl
    • Yarn Stand/Front Yarn Catch.stl
    • Yarn Stand/LH Yarn Catch.stl
    • Yarn Stand/RH Yarn Catch.stl
    • Yarn Stand/Yarn Carrier Front.stl
    • Yarn Stand/Yarn Carrier Rear.stl
    • Yarn Stand/Yarn STand Base.stl
    • Yarn Tensioner/Clamp.stl
    • Yarn Tensioner/Movable plate.stl
    • Yarn Tensioner/Pipe Dropper.stl
    • Yarn Tensioner/Tensioner.stl
  • Cam Carrier Fixing for Stgauvin.stl
  • Cam Shell.pdf
  • Counter.pdf
  • Crank.pdf
  • Cylinder.pdf
  • Frame.pdf
  • General.pdf
  • Main Assembly.pdf
  • Part Labels.zip
  • Threading.pdf
  • Yarn Feed.pdf
  • Yarn Stand Vert Holder.stl
  • Yarn Stand and Tensioner.pdf

Learn more about the formats
Last update 2024-03-05 at 07:01
Publication date 2022-03-16 at 12:45
Design number 666151
kinko3

kinko3

3D printer file info

3D model description

A Machine for knitting socks! Originally these machines were made from metal back in the early 1900's and were common place in homes. To get hold of the original metal machines now is tricky as most have been destroyed or damaged over the past century, the ones that are left are costly! - So roll out the printer, get with the times and let's make some socks!

Below is a list of things you will require to complete the machine.

You will need 3mm bolts of varying lengths, something like this:

Aussel Pan Head Screw Bolts Nuts Stainless Steel M3 Screw Nuts Assortment with Lock Flat Washers 300PCS (Pan Head Screws-300PCS) : Amazon.co.uk: DIY & Tools

You will need a 12mm diameter mild steel bar (Aluminium may well be fine and easier to work with) of at least 200mm long, something like this:

Round Rod Bar Aluminium, Brass, Mild & Stainless Steel 3, 4, 5, 6, 8, 10 & 12mm | eBay

You will need 2 x 24mm bearings with 12mm hole, like these:

sourcing map 6901ZZ Deep Groove Ball Bearing 12x24x6mm Double Shielded Chrome Steel Bearings 5Pcs : Amazon.co.uk: Business, Industry & Science

The needles used in the machine are (Although any needle of the same length and thickness will work):

Agatige 50PCS Steel Knitting Machine Needle, Knitting Machine Needle with Steel Fabric Sewing Tools Set for SK218 SK280 SK580 SK840 SK325 SK360 : Amazon.co.uk: Home & Kitchen

The counter is one like this:

Broco Electronic Counter 5-Digit 0-99999 Digital Clicker LCD Digital Electronic Counter Tester Punch Magnetic Induction Proximity Switch Shockproof Digit Counter : Amazon.co.uk: DIY & Tools

You will need some M5 x 25mm long bolts and nuts for the frame (Nuts are optional as i haven't used them on my own machine and it is fine)

You will need a 200-300mm length, 0.5mm or 0.8mm spring steel to make the yarn tensioner for doing heals and toes.

You will need a 500mm piece of 15mm diameter aluminium tube for the Yarn stand - a wooden dowel of 15mm would do the same job.

There will be a ribber made available pretty soon. I am just working out a few bugs :)

Happy knitting, any issues, get in touch!

Don't get too hung up on the 'exact' parts, the whole idea of this machine was the bring the extortionate costs down so if you have something similar that you think will fit the purpose, give it a go :)

3D printing settings

The larger parts are printed at 0.28mm layer height.

The finer parts are printed at 0.08mm layer height

The larger structural parts have 6 perimeters and %25 infill for strength

There are very few parts that require supports. Parts larger than 200mm have been split so everything will fit on a 200 x 200 mm bed.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.