Dnd Dice Bow | Dungeons and Dragons

This is a Dungeons and Dragons dice holding bow. It holds one set of dice (7 dice), and a pencil.

The handle of the bow has a magnetic compartment composing of 4 neodymium magnets to hold the set of dice and a slot on the outside to hold a pencil. The dice compartment closes with a satisfying click so you always know your dice are secure! The pencil is intended to look like the arrow of the bow and is included in any purchase. The bow also has space for an elastic so that you can draw the bow when you are fighting the toughest monsters at the table.

I recommend going to your local sewing/fabric store to find some 3.5 mm round elastic. Something like this should work well-(https://www.amazon.com/Usew-8-Inch-Stretch-String-Elastic/dp/B00Z642JM2/)

As for the magnets, these are the ones I use-(https://www.amazon.com/GBYMIUY-Refrigerator-Magnets-Cylinder-Whiteboard/dp/B07873ZCY4/ref=)

The bow has space for a standard no.2 pencil (like you would find in school). If you would like to use a different pencil, it is possible to file down the hole or shim it to make it fit. You could also modify the file to accommodate your pencil size.

With its sleek and compact design, this bow is sure impress everyone in your Dungeons and Dragons party.

If you don't have a printer, this is sold on etsy.
(https://www.etsy.com/listing/1199236839/dnd-dice-bow-dungeons-and-dragons)

0.2 mm layer height
Speed-60
Infill-22%
Temperature-210
Printed on the Ender 3 and Ender 3 v2

All files are in the correct orientation for printing.

I use the tree support feature in the cura slicer. (Every part of the pow needs support.