Skip to content

Normandy SR-2

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.5k views
  • 47 likes
  • 12 downloads
  • 1 collection
License
3D design format
RAR and STL Folder details Close
  • 0 Cockpit_Horn_Left.STL
  • 0 Cockpit_Horn_Right.STL
  • 1 Main_Body_1_Cockpit_(no support).STL
  • 1 Main_Body_1_Cockpit_(with support).STL
  • 1 Main_Body_2.STL
  • 1 Main_Body_3.STL
  • 1 Main_Body_4_(no support).STL
  • 1 Main_Body_4_(with support).STL
  • 1 Main_Body_5.STL
  • 1 Main_Body_6.STL
  • 1 Main_Body_7_TailWing_Left.STL
  • 1 Main_Body_7_TailWing_Right.STL
  • 2 Wing_1_Left.STL
  • 2 Wing_1_Right.STL
  • 2 Wing_2_Left.STL
  • 2 Wing_2_Right.STL
  • 3 Left_Gondola_1.STL
  • 3 Left_Gondola_2.STL
  • 3 Left_Gondola_3_Engine.STL
  • 3 Left_Gondola_4_Engine.STL
  • 3 Left_Gondola_5_EngineLens.STL
  • 3 Right_Gondola_1.STL
  • 3 Right_Gondola_2.STL
  • 3 Right_Gondola_3_Engine.STL
  • 3 Right_Gondola_4_Engine.STL
  • 3 Right_Gondola_5_EngineLens.STL
  • 4 Left_Gondola_1.STL
  • 4 Left_Gondola_2.STL
  • 4 Left_Gondola_3_Engine.STL
  • 4 Left_Gondola_4_Engine.STL
  • 4 Left_Gondola_5_EngineLens.STL
  • 4 Right_Gondola_1.STL
  • 4 Right_Gondola_2.STL
  • 4 Right_Gondola_3_Engine.STL
  • 4 Right_Gondola_4_Engine.STL
  • 4 Right_Gondola_5_EngineLens.STL
  • NormandySR2_full.STL
  • Paint map.rar

Learn more about the formats
Publication date 2022-03-22 at 14:01
Design number 671356
ArsenSTYLE_UA

ArsenSTYLE_UA

3D printer file info

3D model description

First was taken a low poly extracted ingame model. And then in few weeks it became near to high poly where each edge before in texture become real in polygons.
Size of fully assembled model is oriented on 80 santimeters lenght. Precise size of assembled model - 804x355x143mm.
So all parts are made with gaps, that they could easely be joined without any hard squising one in other. So pay this moment attention if You are going to change the size of model.
Model made for further installing lights inside same as in main body, same as in thrusters.
Main body have a lid, which can be taken off if not gluing it on place, but adding on it and on main body of 12 magnets, size - Radius 6mm, high 2mm.

Assembly of main body can be made with help as cut filament pins, or using metal rod (for example small, thin nail with cutten out head) for more strong and precise connection.

Also in pack you can find the paint map for model.

3D printing settings

Filament recomended to use in print - PLA.
All parts are recomended to be printed on 0.1 mm high. Though for better quality there are few parts which better to print on 0.05mm high and 100% infil (look below in description).

For all parts can be used 25 infil. Supports used zigzag with 60 degree angle.Though few models can be print without supports (look below in description).

Following this instructions You will need about 1 kg of filament.

All models already are placed as they must be printed to get the best result and to minimize the usage of fillament.

Parts that are recomended to be printed on 0.05 high and 100% ifil are the folloving:

0 Cockpit_Horn_Left
0 Cockpit_Horn_Right
1 Main_Body_1_Cockpit_(with support)
1 Main_Body_1_Cockpit_(no support)

This parts recomended to print with transperent filament, if You are going to sett lights in engines. Infil must be 100%:

3 Left_Gondola_5_EngineLens
3 Right_Gondola_5_EngineLens
4 Left_Gondola_5_EngineLens
4 Right_Gondola_5_EngineLens

Next models can be printed without any additional supports:

1 Main_Body_1_Cockpit_(with support)
1 Main_Body_2
1 Main_Body_3
1 Main_Body_4_(with support)
1 Main_Body_6
3 Left_Gondola_4_Engine
3 Right_Gondola_4_Engine
4 Left_Gondola_4_Engine
4 Right_Gondola_4_Engine

This parts has supports added in the model itself for correct and safe print. They need to be cut off after print:

1 Main_Body_1_Cockpit
1 Main_Body_4

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.