Camp gas bottle

This highly detailed 1/10 scale camp gas bottle comes in 2 versions. Logo and non logo.

The only difference between the 2 are the logo and non logo. One has the logo embossed and the other doesn’t.

It is modeled, scaled and optimised for printing. The design is based on standard gas bottles used for camp stoves, and therefore looks very scale. This will look very good with our “Overland Stove” as the stove is designed to use this kind of gas bottle in real life.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary.

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.
To get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!

Recommended print using a resin printer for best details.