Custom Imperial Fist Repulsor Tank for 7 Inch Space Marines

NOTICE: This is a 3D Model - just a digital model and not a finished vehicle and figure set from Hasbro, McFarlane Toys or other. As such there may be some small issues when printed. It is up to You as the builder to look for solutions to potential problems and to further customize as needed. I am happy to post links or parts if I missed any but building this bad boy is up to you.

This offering is for a custom Repulsor Tank for 7 inch Space Marine Figures. Big thanks to Historia_Fritz (https://cults3d.com/en/3d-model/game/primaris-repulsor-tank) for the model to use for this custom update.

The tank update measures 37 inches long, 23 inches tall and 23 inches wide - approximately. In addition to the updates to add compartments, updated weapons and upscaling I also included accessories such as computers, a generator, weapons crates, fuel cells and five Space Marines which range from 6.82 inches at the shortest to just over 7 at the tallest so that they match up with McFarlane scaled factory figures.

This go-round I have also included 3MF files of the original build which will allow you to edit or modify as needed in addition to the STL files which are included. I edit in Microsoft 3D Builder and print in Chitubox. All sectioned pieces should fit on the smaller 3D printers that have a build plate no greater than 6 inches at the largest point.

Reference the recommended assembly instructions as needed.

I did not create these items (with the exception of the odd hinge her and there and some joints on the custom figures) but I did design the interior of the Tank and the the custom figures attached. I pulled parts and accessories from the following creators here and on Thingiverse.com:

Historia_Fritz – Repulsor Tank
ParallelSoup – Sci-Fi Computer
Curufin – Sci-Fi Power Unit
Nafarrate – Sci-Fi Props
LoreChest – Sci-Fi cannisters
AlexGor248 - Battle Tank Turret
OIM – Macross Chair
MRHERS2 – Supportless Razor the Racer Cat motor bike

Other parts were pulled from my previous builds:
Dark Kraken Sternguard - https://cults3d.com/en/3d-model/various/mcfarlane-custom-8-5in-dark-krakens-sternguard-squad
Custom MK1 Hunter - https://cults3d.com/en/3d-model/various/complete-custom-mk1-hunter
Dark Angels Lascannon Marine - https://cults3d.com/en/3d-model/various/mcfarlane-custom-8-5-inch-dark-angels-heavy-lascannon-marine
Imperial Fist/Crimson Fist build - https://cults3d.com/en/3d-model/various/mcfarlane-custom-8-5-in-imperial-fists-crimson-fists-build
Custom Ultramarines Infiltrator - https://cults3d.com/en/3d-model/various/mcfarlane-8-5-in-scale-custom-ultramarines-infiltrator
Primaris Chaplain - https://cults3d.com/en/3d-model/various/mcfarlane-custom-8-5-in-primaris-chaplain

Credit for all parts used are noted here and in the previous builds listed above. Apologies in advance for anyone not mentioned as it was not on purpose.

ATTENTION- these parts and build are for sharing and/or modification as needed. They are not for downloading and selling on any website be it Ebay, Etsy, Alibaba or other.

Show some love to the creators listed here - they definitely deserve it!