Mario Luigi Bros Kitchen Stand

Kitchen Sponge holder for cleaning sponge in the shape of The Bros Brothers (Mario, Luigi, Wario or Waluigi). This publication contains the following:

• Base (Pants)

• Shirt.

• Shirt 2.

• Arm.

• Hand.

• Leg.

• Shoe.

• Button.

When printing you must duplicate and mirror the following pieces: Arm, Hand, Leg, Shoe and Button.

All parts can be glued together with Instant Glue.

The stand includes slots in the bottom of the stand as drainage for water or liquids that may accumulate in the stand, empty these liquids forward (They are covered with the legs, so the holes will not be visible.

Includes hole to place 1 magnet (8mm diameter) on the bottom so it can be attached to your kitchen/sink/poncho.

The inside of the holder, where the sponge goes measures: 4cm high x 7cm wide x 4cm deep.

The brackets come without logo (It is placed with logo due to intellectual property issues).

Print it and sell it; it is free to market, so I do not ask for acknowledgement or royalties if you want to print it and put it for sale (Only the printing, the design if copyrighted).

Time: 7-8 hours approx. printing time.

Material: PLA+ eSun (48-50 grams approx.)

Printer: Ender 3 Pro.

Horizontal expansion: 0.0

Bed temperature: 60°.

Nozzle temperature: 200°.

Bed adhesion: None.

Parts that might require support (Everywhere 45°):

• Hand.

• Arm.

• Leg.